User`s manual

JampII-mini Users Manual - 7 - PD0606-6-00-01
Table 3-2 Jumper setting
Jumper Function Description
JP1 ASDO 1-2 = boot from synchronous memory
2-3 = boot from asynchronous memory
JP4 BOOT[1] 2-3 = always use this configuration
JP5 BOOT[0] 1-2 = serial boot mode
2-3 = parallel boot mode
JP9 EECLK Open = Boot from internal boot code first
Short = Boot from external boot ROM directly
JP10 Factory Test For factory test only, should left open in normal condition.
JP13 JTAG Reset Open = Disable reset signal form JTAG connector
Short = Enable reset signal from JTAG connector