Manual

CS8952
CrystalLAN™ 100BASE-X and 10BASE-T Transceiver 46
DS206F1
2 Remote Fault Read Only 0 When auto-negotiation is enabled, this bit is set if the
Remote Fault bit is set in the Auto-Negotiation Link
Partner Ability Register (address 05h). When auto-
negotiation is disabled, this bit will be set when the
Far-End Fault Indication for 100BASE-TX is
detected.
1 Page Received Read Only 0 When set, this bit indicates that a valid word of auto-
negotiation data has been received and its integrity
verified. The first page of data will consist of the Base
Page, and all successive pages will consist of Next
Page data. This bit is self-clearing.
This bit is the same as in the Auto-Negotiation
Expansion Register (address 06h).
0 Reserved Read Only 0
BIT NAME TYPE RESET DESCRIPTION