Manual

DS641F6 9
CS8421CS8421
2. CHARACTERISTICS AND SPECIFICATIONS
(All Min/Max characteristics and specifications are guaranteed over the Specified Operating Conditions. Typical per-
formance characteristics and specifications are derived from measurements taken at nominal supply voltages and
T
A
= 25°C.)
SPECIFIED OPERATING CONDITIONS
(GND = 0 V, all voltages with respect to 0 V)
ABSOLUTE MAXIMUM RATINGS
(GND = 0 V; all voltages with respect to 0 V. Operation beyond these limits may result in permanent damage to the device. Nor-
mal operation is not guaranteed at these extremes.)
Notes:
1. Transient currents of up to 100 mA will not cause SCR latch-up.
2. Numbers separated by a colon indicate input and output sample rates. For example, 48 kHz:96 kHz indicates that
Fsi = 48 khz and Fso = 96 kHz.
Parameter Symbol Min Nominal Max Units
Power Supply Voltage VD
VL
2.38
3.14
2.5
3.3 or 5.0
2.62
5.25
V
V
Ambient Operating Temperature: ‘-CZ’
‘-CNZ’
‘-DZ’
‘-EZ’
‘-ENZ’
T
A
-10
-10
-40
-40
-40
-
-
-
-
-
+70
+70
+85
+105
+105
°C
°C
°C
°C
°C
Parameter Symbol Min Max Units
Power Supply Voltage VD
VL
-0.3
-0.3
3.5
6.0
V
V
Input Current, Any Pin Except Supplies (Note 1) I
in
-±10mA
Input Voltage V
in
-0.3 VL+0.4 V
Ambient Operating Temperature (power applied) T
A
-55 +125 °C
Storage Temperature T
stg
-65 +150 °C