Instruction Manual

ABSOLUTE MAXIMUM RATINGS (All voltages with respect to 0V)
Parameter Symbol Min Max Units
Power Supplies -0.3 6.0 V
Input Current Except Supply Pins & Driver Pins -
±10
mA
Input Voltage -0.3 VD+0.3 V
Ambient temperature (Power Applied) -55 +125
°C
Storage Temperature -65 +150
°C
ESD using human body model (100pF with series 1.5kΩ)
2000 - V
Warning: Operation beyond these limits may result in permanent damage to the device.
Normal operation is not guaranteed at these extremes.
SWITCHING CHARACTERISTICS (T
A
= 25 °C; All V+ = 3.0V, Digital Input Levels: Logic 0 = 0V, Logic 1 = V+;
unless otherwise specified)
Parameter Symbol Min Typ Max Units
XTALIN frequencies CLKFR pin low:
(Note 11) CLKFR pin high:
-
-
3.6864
1.8432
-
-
MHz
MHz
XTALIN duty cycle 45 50 55 %
Crystal Oscillator start up time - - 25 ms
Notes: 11. In normal oscillator mode, the crystal is internally loaded with 20 pF, which is the standard loading
at which the crystal frequency is tuned. In low power oscillator mode, the internal loading on the
crystal is reduced to approximately 5pF. The crystal frequency will therefore increase by
about 0.03% in low power mode.
CS8130
4 DS134PP2
CS8130
4 DS134F1