Manual

CS5490
32 DS982F3
6.6 Register Descriptions
21. “Default” = bit states after power-on or reset
22. DO NOT write a “1” to any unpublished register bit or to a bit published as “0”.
23. DO NOT write a “0” to any bit published as “1”.
24. DO NOT write to any unpublished register address.
6.6.1 Configuration 0 (Config0) – Page 0, Address 0
Default = 0xC0 2000
[23:9] Reserved.
INT_POL Interrupt Polarity.
0 = Active low (Default)
1 = Active high
[7:6] Reserved.
IPGA[1:0] Select PGA gain for I channel.
00 = gain (Default)
10 = 50x gain
[3] Reserved.
NO_OSC Disable crystal oscillator (making XIN a logic-level input).
0 = Crystal oscillator enabled (Default)
1 = Crystal oscillator disabled
23 22 21 20 19 18 17 16
1100- -- -
15 14 13 12 11 10 9 8
-01----INT_POL
76543210
- - IPGA[1] IPGA[0] - NO_OSC 0 0