Manual

CS5462
8 DS547F1
ABSOLUTE MAXIMUM RATINGS
WARNING: Operation at or beyond these limits may result in permanent damage to the device.
Normal operation is not guaranteed at these extremes.
10. VA+ and AGND must satisfy {(VA+) - (AGND)}  + 6.0 V.
11. VD+ and AGND must satisfy {(VD+) - (AGND)}
 + 6.0 V.
12. VA+ and VD+ can differ by as much as 200 mV, as long as VA+ > VD+.
13. Applies to all pins including continuous over-voltage conditions at the analog input pins.
14. Transient current of up to 100 mA will not cause SCR latch-up.
15. Maximum DC input current for a power supply pin is ±50 mA.
16. Total power dissipation, including all input currents and output currents.
Parameter Symbol Min Typ Max Unit
DC Power Supplies (Notes 10, 10 and 12)
Positive Digital
Positive Analog
VD+
VA+
-0.3
-0.3
-
-
+6.0
+6.0
V
V
Input Current, Any Pin Except Supplies (Notes 13, 14, 15) I
IN
--±10mA
Power Dissipation (Note 16) P
D --500mW
Analog Input Voltage All Analog Pins V
INA
- 0.3 - (VA+) + 0.3 V
Digital Input Voltage All Digital Pins V
IND
-0.3 - (VD+) + 0.3 V
Ambient Operating Temperature T
A
-40 - 85 °C
Storage Temperature T
stg
-65 - 150 °C