Owner manual

DS700PP1 11
CS53L21
3. CHARACTERISTIC AND SPECIFICATION TABLES
(All Min/Max characteristics and specifications are guaranteed over the Specified Operating Conditions. Typical per-
formance characteristics and specifications are derived from measurements taken at nominal supply voltages and
T
A
= 25° C.)
SPECIFIED OPERATING CONDITIONS
(AGND=DGND=0 V, all voltages with respect to ground.)
ABSOLUTE MAXIMUM RATINGS
(AGND = DGND = 0 V; all voltages with respect to ground.)
WARNING: Operation at or beyond these limits may result in permanent damage to the device. Normal operation
is not guaranteed at these extremes.
Notes:
1. The device will operate properly over the full range of the analog, digital core and serial/control port in-
terface supplies.
2. Any pin except supplies. Transient currents of up to ±100 mA on the analog input pins will not cause
SCR latch-up.
3. The maximum over/under voltage is limited by the input current.
Parameters Symbol Min Nom Max Units
DC Power Supply (Note 1)
Analog Core
VA
1.65
2.37
1.8
2.5
1.89
2.63
V
V
Digital Core
VD
1.65
2.37
1.8
2.5
1.89
2.63
V
V
Serial/Control Port Interface
VL
1.65
2.37
3.14
1.8
2.5
3.3
1.89
2.63
3.47
V
V
V
Ambient Temperature Commercial - CNZ
Automotive - DNZ
T
A
-10
-40
-
-
+70
+85
°C
°C
Parameters Symbol Min Max Units
DC Power Supply Analog
Digital
Serial/Control Port Interface
VA
VD
VL
-0.3
-0.3
-0.3
3.0
3.0
4.0
V
V
V
Input Current (Note 2)
I
in
-±10mA
Analog Input Voltage (Note 3)
V
IN
AGND-0.7 VA+0.7
V
Digital Input Voltage
(Note 3)
V
IND
-0.3 VL+ 0.4 V
Ambient Operating Temperature (power applied)
T
A
-50 +115 °C
Storage Temperature
T
stg
-65 +150 °C