User Manual

DS658F4 33
CS5345
6.3 ADC Control - Address 04h
6.3.1 Functional Mode (Bits 7:6)
Function:
Selects the required range of sample rates.
6.3.2 Digital Interface Format (Bit 4)
Function:
The required relationship between LRCK, SCLK and SDOUT is defined by the Digital Interface Format
bit. The options are det ailed in Table 8 and may be see n in Figure 3 and Figure 4.
6.3.3 Mute (Bit 2)
Function:
When this bit is set, the serial audio output of the both channels is muted.
6.3.4 High-Pass Filter Freeze (Bit 1)
Function:
When this bit is set, the internal high-pass filter is disabled. The current DC offset value will be frozen and
continue to be subtracted fr om the conversion result. See “High-Pass Filter and DC Offset Calibration” on
page 24.
6.3.5 Master / Slave Mode (Bit 0)
Function:
This bit selects either master or slave operation for the serial audio port. Setting this bit selects Master
Mode, while clearing this bit selects Slave Mode.
76543210
FM1 FM0 Reserved DIF Reserved Mute HPFFreeze M/S
FM1 FM0 Mode
0 0 Single-Speed Mode: 4 to 50 kHz sample rates
0 1 Double-Speed Mode: 50 to 100 kHz sample rates
1 0 Quad-Speed Mode: 100 to 200 kHz sample rates
11Reserved
Table 7. Functional Mode Selection
DIF Description Format Figure
0 L ef t-Justified, up to 24-b it da ta (defa ult ) 0 3
1 I²S, up to 24-bit data 1 4
Tabl e 8. Digital Interface Formats