User guide

Creating a Condenser Project using a Model

CS4953x4/CS4970x4 System Designer’s Guide

8.4 Creating a Condenser Project using a Model

8.4.1 Using the Wizard to Create a Project

1. Install the DSPcondenser.exe and the required firmware modules into the cs4953x_eval_kit install

directory (Eg: C:\CirrusDSP).

2. Open dspcondenser wizard from the Start Menu  CirusDSP.c .

3. To create a new project, Click on File  New project.

4. Type a suitable project name. Choose the appropriate model. The models basically provide a

starting point with example configurations for the project.

• Sample model corresponds to a project with unlicensed technologies (suitable for CS4953x4,

CS4970x4)

• Sample_licensed_legacy model corresponds to a project with legacy licensed firmware modules

(suitable for CS4953x4)

• Sample_licensed model corresponds to a project with legacy and HD licensed firmware modules

(suitable for CS4970x4)

This creates a project with the provided project name in

C:\CirrusDSP\DSPCondenser\projects\<project_name>