Specifications

C E N T A U R U S P R I M E
20
2020
20
BACnet ID 8 (AI) "Damper/Valve Pos " Fld: 24 ==> 24.00
BACnet ID 9 (AI) "Maximum Flow Size " Fld: 16 ==> 1100.00
BACnet ID 10 (AI) "Present CFM Flow " Fld: 0 ==> 0.00
BACnet ID 111 (AO) "Max Heating Flow SPT " Fld: 16 ==> 16.00
BACnet ID 11 (AI) "Max Heating Flow " Fld: 16 ==> 16.00
BACnet ID 112 (AO) "Min Heating Flow SPT " Fld: 15 ==> 15.00
BACnet ID 12 (AI) "Min Heating Flow " Fld: 15 ==> 15.00
BACnet ID 113 (AO) "Max Cooling Flow SPT " Fld: 90 ==> 90.00
BACnet ID 13 (AI) "Max Cooling Flow " Fld: 90 ==> 90.00
BACnet ID 114 (AO) "Min Cooling Flow SPT " Fld: 25 ==> 25.00
BACnet ID 14 (AI) "Min Cooling Flow " Fld: 90 ==> 90.00
BACnet ID 115 (AO) "Fan Ctl Offset SPT " Fld: 3 ==> 3.00
BACnet ID 15 (AI) "Fan Ctl Offset Value " Fld: 90 ==> 90.00
BACnet ID 16 (AI) "AUX Temperature " Fld: 73 ==> 73.00
BACnet ID 201 (AV) "Analog Value 1 (User) " Fld: 22 ==> 22.00
BACnet ID 202 (AV) "Analog Value 2 (User) " Fld: 10 ==> 10.00
BACnet ID 203 (AV) "K-Packets TX/RX Today" Fld: 27 ==> 27.00
BACnet ID 204 (AV) "TX Error Rate " Fld: 1 ==> .51
BACnet ID 205 (AV) "RX Error Rate " Fld: 0 ==> 0.00
BACnet ID 301 (DI) "Current Fan Status " Fld: 0 OFF (0-state)
BACnet ID 302 (DI) "Control Mode Status " Fld: 0 COOL (0-state)
BACnet ID 303 (DI) "Heating Status " Fld: 0 OFF (0-state)
BACnet ID 410 (DO) "Damper Forced Open CTL" Fld: 0 OFF (0-state)
BACnet ID 310 (DI) "Damper Forced Open " Fld: 0 NORMAL (0-state)
BACnet ID 411 (DO) "Damper Forced Close CTL" Fld: 0 OFF (0-state)
BACnet ID 311 (DI) "Damper Forced Closed " Fld: 0 NORMAL (0-state)
BACnet ID 412 (DO) "OCC/UNOCC Mode CTL" Fld: 0 OCCUPIED (0-state)
BACnet ID 312 (DI) "OCC/UNOCC Mode Ctl " Fld: 0 OCCUPIED (0-state)
BACnet ID 413 (DO) "Local SPT Control " Fld: 16 DISABLED (1-state)
BACnet ID 313 (DI) "Local SPT Status " Fld: 16 DISABLED (1-state)
BACnet ID 414 (DO) "Min Setpoint Forced " Fld: 0 NORMAL (0-state)
BACnet ID 314 (DI) "Min Setpoint Forced " Fld: 0 NORMAL (0-state)
BACnet ID 415 (DO) "Max Setpoint Forced " Fld: 0 NORMAL (0-state)
BACnet ID 315 (DI) "Max Setpoint Forced " Fld: 0 NORMAL (0-state)
BACnet ID 416 (DO) "Temp/Flow Mode CTL " Fld: 0 TEMP (0-state)
BACnet ID 316 (DI) "Temp/Flow Mode FB " Fld: 0 TEMP (0-state)
BACnet ID 417 (DO) "Recalibration CTL " Fld: 0 OFF (0-state)
BACnet ID 317 (DI) "Recalibration Status " Fld: 0 OFF (0-state)
(S)elect: With Select, you can target a specific point for the Device that you have
targeted using the “Devices” menu.
PNT: (S)elect, (A)ll, (D)etail, (X)-it :S