Manual

DS650F1 3
CS4461
1. CHARACTERISTICS AND SPECIFICATIONS
(All Min/Max characteristics and specifications are guaranteed over the Specified Operating Conditions. Typical
performance characteristics and specifications are derived from measurements taken at typical supply voltages
and T
A
= 25°C.)
SPECIFIED OPERATING CONDITIONS
(GND = 0 V, all voltages with respect to 0 V.)
ABSOLUTE MAXIMUM RATINGS
(GND = 0 V, All voltages with respect to ground.) (Note 1)
Notes:
1. Operation beyond these limits may result in permanent damage to the device.
Normal operation is not guaranteed at these extremes.
2. Any pin except supplies. Transient currents of up to ±100 mA on the analog input pins will not cause
SCR latch-up.
3. The maximum over/under voltage is limited by the input current.
Parameter Symbol Min Typ Max Unit
DC Power Supplies: Positive Analog
Positive Digital
VA
VDP
4.75
3.1
5.0
3.3
5.25
5.25
V
V
Ambient Operating Temperature Commercial (-CZZ)
Automotive (-DZZ)
T
AC
T
AA
-10
-40
-
-
+70
+85
°C
°C
Parameter Symbol Min Max Units
DC Power Supplies: Analog
Digital
VA
VDP
-0.3
-0.3
+6.0
+6.0
V
V
Input Current (Note 2) I
in
- ±10 mA
Analog Input Voltage (Note 3) V
IN
GND - 0.7 VA + 0.7 V
Digital Input Voltage (Note 3) V
IND
-0.7 VDP + 0.7 V
Ambient Operating Temperature (Power Applied) T
A
-50 +95 °C
Storage Temperature T
stg
-65 +150 °C