User Manual
Table Of Contents
- 1. Pin Description
- 2. Characteristics and Specifications
- Recommended Operating Conditions
- Absolute Maximum Ratings
- DAC Analog Characteristics
- Power and Thermal Characteristics
- Combined Interpolation & On-Chip Analog Filter Response
- Combined Interpolation & On-Chip Analog Filter Response
- DSD Combined Digital & On-Chip Analog Filter Response
- Digital Characteristics
- Switching Characteristics - PCM
- Switching Characteristics - DSD
- Switching Characteristics - Control Port - I·C Format
- Switching Characteristics - Control Port - SPI Format
- 3. Typical Connection Diagram
- 4. Applications
- 4.1 Master Clock
- 4.2 Mode Select
- 4.3 Digital Interface Formats
- Figure 8. Format 0 - Left-Justified up to 24-bit Data
- Figure 9. Format 1 - I·S up to 24-bit Data
- Figure 10. Format 2 - Right-Justified 16-bit Data
- Figure 11. Format 3 - Right-Justified 24-bit Data
- Figure 12. Format 4 - Right-Justified 20-bit Data
- Figure 13. Format 5 - Right-Justified 18-bit Data
- 4.3.1 OLM #1
- 4.3.2 OLM #2
- 4.4 Oversampling Modes
- 4.5 Interpolation Filter
- 4.6 De-Emphasis
- 4.7 ATAPI Specification
- 4.8 Direct Stream Digital (DSD) Mode
- 4.9 Grounding and Power Supply Arrangements
- 4.10 Analog Output and Filtering
- 4.11 The MUTEC Outputs
- 4.12 Recommended Power-Up Sequence
- 4.13 Recommended Procedure for Switching Operational Modes
- 4.14 Control Port Interface
- 4.15 Memory Address Pointer (MAP)
- 5. Register Quick Reference
- 6. Register Description
- 6.1 Chip Revision (Address 01h)
- 6.2 Mode Control 1 (Address 02h)
- 6.3 PCM Control (Address 03h)
- 6.4 DSD Control (Address 04h)
- 6.5 Filter Control (Address 05h)
- 6.6 Invert Control (Address 06h)
- 6.7 Group Control (Address 07h)
- 6.8 Ramp and Mute (Address 08h)
- 6.9 Mute Control (Address 09h)
- 6.10 Mixing Control (Address 0Ah, 0Dh, 10h, 13h)
- 6.11 Volume Control (Address 0Bh, 0Ch, 0Eh, 0Fh, 11h, 12h)
- 6.12 PCM Clock Mode (Address 16h)
- 7. Filter Response Plots
- Figure 24. Single-Speed (fast) Stopband Rejection
- Figure 25. Single-Speed (fast) Transition Band
- Figure 26. Single-Speed (fast) Transition Band (detail)
- Figure 27. Single-Speed (fast) Passband Ripple
- Figure 28. Single-Speed (slow) Stopband Rejection
- Figure 29. Single-Speed (slow) Transition Band
- Figure 30. Single-Speed (slow) Transition Band (detail)
- Figure 31. Single-Speed (slow) Passband Ripple
- Figure 32. Double-Speed (fast) Stopband Rejection
- Figure 33. Double-Speed (fast) Transition Band
- Figure 34. Double-Speed (fast) Transition Band (detail)
- Figure 35. Double-Speed (fast) Passband Ripple
- Figure 36. Double-Speed (slow) Stopband Rejection
- Figure 37. Double-Speed (slow) Transition Band
- Figure 38. Double-Speed (slow) Transition Band (detail)
- Figure 39. Double-Speed (slow) Passband Ripple
- Figure 40. Quad-Speed (fast) Stopband Rejection
- Figure 41. Quad-Speed (fast) Transition Band
- Figure 42. Quad-Speed (fast) Transition Band (detail)
- Figure 43. Quad-Speed (fast) Passband Ripple
- Figure 44. Quad-Speed (slow) Stopband Rejection
- Figure 45. Quad-Speed (slow) Transition Band
- Figure 46. Quad-Speed (slow) Transition Band (detail)
- Figure 47. Quad-Speed (slow) Passband Ripple
- 8. References
- 9. Parameter Definitions
- 10. Package Dimensions
- 11. Ordering Information
- 12. Revision History

4 DS619F1
CS4364
LIST OF FIGURES
Figure 1. Serial Audio Interface Timing...................................................................................................... 14
Figure 2. Direct Stream Digital - Serial Audio Input Timing........................................................................ 15
Figure 3. Direct Stream Digital - Serial Audio Input Timing for Phase Modulation Mode........................... 15
Figure 4. Control Port Timing - I²C Format................................................................................................. 16
Figure 5. Control Port Timing - SPI Format................................................................................................ 17
Figure 6. Typical Connection Diagram, Software Mode.............................................................................18
Figure 7. Typical Connection Diagram, Hardware Mode ........................................................................... 19
Figure 8. Format 0 - Left-Justified up to 24-bit Data .................................................................................. 22
Figure 9. Format 1 - I²S up to 24-bit Data .................................................................................................. 22
Figure 10. Format 2 - Right-Justified 16-bit Data....................................................................................... 22
Figure 11. Format 3 - Right-Justified 24-bit Data....................................................................................... 22
Figure 12. Format 4 - Right-Justified 20-bit Data....................................................................................... 22
Figure 13. Format 5 - Right-Justified 18-bit Data....................................................................................... 23
Figure 14. Format 8 - One Line Mode 1..................................................................................................... 23
Figure 15. Format 9 - One Line Mode 2..................................................................................................... 23
Figure 16. De-Emphasis Curve.................................................................................................................. 24
Figure 17. ATAPI Block Diagram (x = channel pair 1, 2, or 3) ................................................................... 25
Figure 18. DSD Phase Modulation Mode Diagram ....................................................................................26
Figure 19. Full-Scale Output ...................................................................................................................... 27
Figure 20. Recommended Output Filter..................................................................................................... 27
Figure 21. Recommended Mute Circuitry .................................................................................................. 28
Figure 22. Control Port Timing, I²C Mode .................................................................................................. 30
Figure 23. Control Port Timing, SPI Mode ................................................................................................. 31
Figure 24. Single-Speed (fast) Stopband Rejection................................................................................... 43
Figure 25. Single-Speed (fast) Transition Band......................................................................................... 43
Figure 26. Single-Speed (fast) Transition Band (detail)............................................................................. 43
Figure 27. Single-Speed (fast) Passband Ripple ....................................................................................... 43
Figure 28. Single-Speed (slow) Stopband Rejection ................................................................................. 43
Figure 29. Single-Speed (slow) Transition Band........................................................................................ 43
Figure 30. Single-Speed (slow) Transition Band (detail)............................................................................ 44
Figure 31. Single-Speed (slow) Passband Ripple...................................................................................... 44
Figure 32. Double-Speed (fast) Stopband Rejection ................................................................................. 44
Figure 33. Double-Speed (fast) Transition Band........................................................................................ 44
Figure 34. Double-Speed (fast) Transition Band (detail)............................................................................ 44
Figure 35. Double-Speed (fast) Passband Ripple...................................................................................... 44
Figure 36. Double-Speed (slow) Stopband Rejection................................................................................ 45
Figure 37. Double-Speed (slow) Transition Band ...................................................................................... 45
Figure 38. Double-Speed (slow) Transition Band (detail) .......................................................................... 45
Figure 39. Double-Speed (slow) Passband Ripple .................................................................................
... 45
Figure 40. Quad-Speed (fast) Stopband Rejection.................................................................................... 45
Figure 41. Quad-Speed (fast) Transition Band .......................................................................................... 45
Figure 42. Quad-Speed (fast) Transition Band (detail) .............................................................................. 46
Figure 43. Quad-Speed (fast) Passband Ripple ........................................................................................ 46
Figure 44. Quad-Speed (slow) Stopband Rejection................................................................................... 46
Figure 45. Quad-Speed (slow) Transition Band......................................................................................... 46
Figure 46. Quad-Speed (slow) Transition Band (detail)............................................................................. 46
Figure 47. Quad-Speed (slow) Passband Ripple....................................................................................... 46