Manual

CS4341A
8 DS582F2
3.3 System Clocking
The device requires external generation of the master (MCLK), left/right (LRCK) and serial (SCLK)
clocks. The LRCK, defined also as the input sample rate (F
s
), must be synchronously derived from the
MCLK according to specified ratios. The specified ratios of MCLK to LRCK for each Speed Mode, along
with several standard audio sample rates and the required MCLK frequency, are illustrated in Tables 3-5.
* Requires MCLKDIV bit = 1 in the Mode Control 1 register (address 00h).
3.4 Digital Interface Format
The device will accept audio samples in several digital interface formats. The desired format is selected
via the DIF0, DIF1 and DIF2 bits in the Mode Control 2 register (see section 5.2.2) . For an illustration of
the required relationship between LRCK, SCLK and SDIN, see Figures 2-4.
Sample Rate
(kHz)
MCLK (MHz)
256x 384x 512x 768x 1024x*
32 8.1920 12.2880 16.3840 24.5760 32.7680
44.1 11.2896 16.9344 22.5792 33.8688 45.1584
48 12.2880 18.4320 24.5760 36.8640 49.1520
Table 3. Single-Speed Mode Standard Frequencies
Sample Rate
(kHz)
MCLK (MHz)
128x 192x 256x 384x 512x*
64 8.1920 12.2880 16.3840 24.5760 32.7680
88.2 11.2896 16.9344 22.5792 33.8688 45.1584
96 12.2880 18.4320 24.5760 36.8640 49.1520
Table 4. Double-Speed Mode Standard Frequencies
Sample Rate
(kHz)
MCLK (MHz)
128x 192x 256x*
176.4 22.5792 33.8688 45.1584
192 24.5760 36.8640 49.1520
Table 5. Quad-Speed Mode Standard Frequencies
LRCK
SCLK
Left Channel
Right Channel
SDIN +3 +2 +1+5 +4
MSB
-1 -2 -3 -4 -5
+3 +2 +1+5 +4
-1 -2 -3 -4
MSB
LSB
LSB
Figure 2. I
2
S Data