Instruction Manual

DS882F1 123
CS42L73
6.51.3 Digital Mixer Overflow
- Read Only; sticky;  edge can trigger interrupt
Indicates the over-range status in the digital mixer data path. This status bit is sticky. Rising-edge state
transitions cause an interrupt, if the associated interrupt mask bit is set.
6.51.4 Input Path x Overflow
- Read Only; sticky;  edge can trigger interrupt
Indicates the over-range status in the input path channel x signal path. This status bit is sticky. Ris-
ing-edge state transitions cause an interrupt if the associated interrupt mask bit is set.
6.52 Interrupt Status Register 2 (Address 61h)
- Read Only
Refer to section “Interrupts” on page 70.
6.52.1 Voice ASRC Data Out Lock
- Read Only; sticky;  edge can trigger interrupt
Indicates the lock status of the ASRC for the voice data out. This status bit is sticky. Rising-edge state
transitions cause an interrupt, if the associated interrupt mask bit is set.
6.52.2 Voice ASRC Data In Lock
- Read Only; sticky;
 edge can trigger interrupt
Indicates the lock status of the ASRC for the voice data in. This status bit is sticky. Rising-edge state tran-
sitions cause an interrupt, if the associated interrupt mask bit is set.
DIGMIXOVFL PCM Overflow Status
0 No digital clipping has occurred in the data path of the digital mixer
1 Digital clipping has occurred in the data path of the digital mixer
IPxOVFL Input Path Overflow Status
0 No clipping has occurred anywhere in the Input Path signal path
1 Clipping has occurred in the Input Path signal path
76543210
Reserved Reserved VASRC_DOLK VASRC_DILK AASRC_DOLK AASRC_DILK XASRC_DOLK XASRC_DILK
VASRC_DOLK Status
0 Unlocked
1 Locked
VASRC_DILK Status
0 Unlocked
1 Locked