User Manual

DS851F2 23
CS42L56
SWITCHING SPECIFICATIONS - I²C CONTROL PORT
Inputs: Logic 0 = GND = AGND, Logic 1 = VL (Note 22) .
Notes:
22. All specifications are valid for the signals at the pins of the CS42L56 with the specified load capacitance.
23. Data must be held for sufficient time to bridge the transition time, t
f
, of SCL.
Parameter Symbol Min Max Unit
RESET Rising Edge to Start t
irs
500 - ns
SCL Clock Frequency f
scl
- 550 kHz
Start Condition Hold Time (prior to first clock pulse) t
hdst
0.6 - µs
Clock Low Time t
low
1.3 - µs
Clock High Time t
high
0.6 - µs
Setup Time for Repeated Start Condition t
sust
0.6 - µs
SDA Input Hold Time from SCL Falling (Note 23) t
hddi
00.9µs
SDA Output Hold Time from SCL Falling t
hddo
0.2 0.9 µs
SDA Setup Time to SCL Rising t
sud
100 - ns
Rise Time of SCL and SDA t
rc
-300ns
Fall Time SCL and SDA t
fc
-300ns
Setup Time for Stop Condition t
susp
0.6 - µs
Bus Free Time Between Transmissions t
buf
1.3 - µs
SDA Bus Capacitance C
L
-400pF
SDA Pull-Up Resistance R
p
500 - 
t
buf
t
hdst
t
hdst
t
low
t
r
t
f
t
hdd
t
high
t
sud
t
sust
t
susp
Stop Start
Start
Stop
Repeated
SDA
SCL
t
irs
RESET
Figure 10. I²C Control Port Timing