User Manual

Table Of Contents
DS680F2 35
CS42L52
3/1/13
4.7 Digital Interface Formats
The serial port operates in standard I²S, Left-justified, Right-justified (DAC only), or DSP Mode digital inter-
face formats with varying bit depths from 16 to 24. Data is clocked out of the ADC or into the DAC on the
rising edge of SCLK.
4.7.1 DSP Mode
In DSP Mode, the LRCK acts as a frame sync for 2 data-packed words (left and right channel) input on
SDIN and output on SDOUT. The MSB is input/output on the first SCLK rising edge after the frame sync
rising edge. The right channel immediately follows the left channel.
27.0000
8.0000 11 1 1 01 0
12.0000 11 0 1 01 0
24.0000 10 0 1 01 0
32.0000 01 1 1 01 0
44.117601 0 1110
48.0000 01 0 1 01 0
11.029411 0 1110
22.058810 0 1110
16.0000 10 1 1 01 0
MCLK
(MHz)
Sample Rate,
Fs (kHz)
SPEED[1:0]
(AUTO=’0’b)
32kGROUP VIDEOCLK RATIO[1:0] MCLKDIV2
Table 1. MCLK, LRCK Quick Decode
LRCK
SCLK
MSB LSB
MSB
LSB
AOUTA / AINxA
Left Channel Right Channel
SDOUT
SDIN
AOUTB / AINxB
MSB
Figure 16. I²S Format
LRCK
SCLK
MSB LSB
MSB
LSB
Left Channel Right Channel
SDOUT
SDIN
MSB
AOUTA / AINxA
AOUTB / AINxB
Figure 17. Left-Justified Format
LRCK
SCLK
MSB LSB
MSB LSB
Left Channel Right Channel
SDIN
AOUTL AOUTR
Audio Word Length (AWL)
Figure 18. Right-Justified Format (DAC only)