User Manual

DS584F2 63
CS42518
6.19 Receiver Mode Control 2 (address 1Fh)
6.19.1 TXP MULTIPLEXER (TMUXX)
Default = 000
Function:
Selects which of the eight receiver inputs will be mapped directly to the TXP output pin.
6.19.2 RECEIVER MULTIPLEXER (RMUXX)
Default = 000
Function:
Selects which of the eight receiver inputs will be mapped to the internal receiver.
6.20 Interrupt Status (address 20h) (Read Only)
For all bits in this register, a “1” means the associated interrupt condition has occurred at least once since the reg-
ister was last read. A ”0” means the associated interrupt condition has NOT occurred since the last reading of the
register. Reading the register resets all bits to 0. Status bits that are masked off in the associated mask register will
always be “0” in this register.
76543210
Reserved TMUX2 TMUX1 TMUX0 Reserved RMUX2 RMUX1 RMUX0
TMUX2 TMUX1 TMUX0 Description
000
Output from pin RXP0
001
Output from pin RXP1
010
Output from pin RXP2
011
Output from pin RXP3
100
Output from pin RXP4
101
Output from pin RXP5
110
Output from pin RXP6
111
Output from pin RXP7
Table 18. TXP Output Selection
RMUX2 RMUX1 RMUX0 Description
000
Input from pin RXP0
001
Input from pin RXP1
010
Input from pin RXP2
011
Input from pin RXP3
100
Input from pin RXP4
101
Input from pin RXP5
110
Input from pin RXP6
111
Input from pin RXP7
Table 19. Receiver Input Selection
76543210
UNLOCK Reserved QCH DETC DETU Reserved OverFlow RERR