Owner manual

DS963F4 43
CS35L32
7.22 LED Lighting Status
7.22 LED Lighting Status
Address 0x18
R/O
76543210
LED1_FLEV LED2_FLEV LED1_MVEV LED2_MVEV LED_FLEN LED_FLINH LED2_DIS LED_TIMERON
Defaultxxxxxxxx
Bits Name Description
7LED1_
FLEV
LED1 flash event
0 (Default) No driver flash current to LED
1 Flash current delivered to LED
6LED2_
FLEV
LED2 flash event
0 (Default) No driver flash current to LED
1 Flash current delivered to LED
5LED1_
MVEV
LED1 Movie Mode event
0 (Default) No driver movie current to LED
1 Movie current delivered to LED
4LED2_
MVEV
LED2 Movie Mode event
0 (Default) No driver movie current to LED
1 Movie current delivered to LED
3LED_
FLEN
Flag mirroring FLEN
0 (Default) FLEN low
1 FLEN high
2LED_
FLINH
Flag mirroring FLINH
0 (Default) FLINH low
1 FLINH high
1LED2_
DIS
LED2 disabled status reporting the use of FLOUT2 as AD0, with no LED, and tied to ground
0 (Default) Enabled
1 Disabled (tied to ground)
0LED_
TIMERON
Flash timer. Flag indicating the status of the flash timer.
0 (Default) Timer off
1Timer on
7.23 LED Flash Mode Current
Address 0x19
R/W
76543210
— LED_FLCUR[3:0]
Default00000000
Bits Name Description
7:4 — Reserved
3:0 LED_
FLCUR
LED flash driver current in 50-mA increments.
Note: If an open-circuit condition occurs on one FLOUTx pin, the current through the other FLOUTx pin is 50 mA lower than
the LED_FLCUR programmed value.
0000 (Default) OFF
0001–0110 Reserved
0111 350 mA
1000 400 mA
1001 450 mA
1010 500 mA
1011 550 mA
1100 600 mA
1101 650 mA
1110 700 mA
1111 750 mA