Instruction Manual

CS35L01/03
6 DS909F1
2. DIGITAL BALL CONFIGURATIONS
See (Note 1) and (Note 2) below the table.
Note:
1. Refer to specification table “Digital Interface Specifications and Characteristics” on page 14 for details
on the digital I/O characteristics.
2. I/O voltage levels must not exceed the voltage listed in table “Absolute Maximum Ratings” on page 8.
Power Supply I/O Name Ball Direction Internal Connections Configuration
VBATT
SD
C2 Input No Internal Pull Up Hysteresis on CMOS Input
MODE A2 Input No Internal Pull Up Hysteresis on CMOS Input