Owner's manual

CobraNet Hardware User’s Manual

Mechanical Drawings and Schematics

Version 2.3

9.0 Mechanical Drawings and Schematics

The section contains detailed drawings of the CM-2 board and CS1810xx/CS4961xx

device package design. The mechanical drawings are arranged as follows:

• "CM-2 Module Assembly Drawing, Top" on page 38

• "General PCB Dimensions" on page 40

• "Example Configuration, Side View" on page 41

• "Faceplate Dimensions" on page 42

• "Connector Detail" on page 43

• "CM-2 RevF Schematic Page 1 of 7" on page 44

• "CM-2 RevF Schematic Page 2 of 7" on page 45

• "CM-2 RevF Schematic Page 3 of 7" on page 46

• "CM-2 RevF Schematic Page 4 of 7" on page 47

• "CM-2 RevF Schematic Page 5 of 7" on page 48

• "CM-2 RevF Schematic Page 6 of 7" on page 49

• "CM-2 RevF Schematic Page 7 of 7" on page 50

• "144-Pin LQFP Package Drawing" on page 51