User Manual
Table Of Contents
- Features
- Overview
- 1. Characteristics and Specifications
- 2. Hardware Overview
- 3. Software Overview
- 4. Revision History
- 4. Schematic
- 5. Bill of Materials
- 6. Layout
CRD5490-Z
DS988RD1 17
4. Confirm that the initial conditions are configured as shown in Figure 17:
5. Click the Quick Measurements tab to bring it forward, and click the START button.
6. Wait approximately 5 to 10 seconds for the readings to update.
7. Click the STOP button.
Figure 17. Calibration Tab with Initial Calibration Configuration