Owner manual

CDB5376
20 DS612DB3
2.2.2.3 Anti-alias RC Filters
The CS5372A ∆Σ modulator is 4th order and high-frequency input signals can cause instability. Simple
single-pole anti-alias RC filters are required between the CS3301A/02A amplifier outputs and the
CS5372A modulator inputs to bandwidth limit analog signals into the modulator.
The CS3301A/02A amplifier outputs are connected to external 680
Ω series resistors and a differential
anti-alias RC filter is created by connecting 20 nF of high-linearity differential capacitance (2x 10 nF C0G)
between each half of the rough and fine signals.
2.2.3 Delta-Sigma Modulators
A single CS5372A dual modulator performs the A/D function for differential analog signals from two
CS3301A/02A amplifiers. The digital outputs are oversampled ∆Σ bit streams.
2.2.3.1 Rough-Fine Inputs - INR, INF
The modulator analog inputs are separated into rough and fine signals, each of which has an anti-alias
RC filter to limit the signal bandwidth into the modulator inputs.
Figure 2. RC Filter External Components
INR+
INF+
INF-
INR-
INR+
INF+
INF-
INR-
Analog Signals Description
INR1, INF1 Channel 1 analog rough / fine inputs
INR2, INF2 Channel 2 analog rough / fine inputs
VREF Voltage reference analog inputs
Digital Signals Description
MDATA[1..2] Modulator delta-sigma data outputs
MFLAG[1..2] Modulator over-range flag outputs
MCLK Modulator clock input
MSYNC Modulator synchronization input
PWDN[1..2] Power down mode enable
OFST Internal offset enable (+VD when using CS3301A/02A)