User Manual

DS773DB1 11
CDB42L55
4.1 Board Configuration Tab
The “Board Configuration” tab provides high-level control of signal routing on the CDB42L55. The controls
in this tab are used to setup the CS8416, CS8406, TxSRC, RxSRC and the FPGA Routing and are divide d
into separate section s or control groups for each of th ese individual components. A description of each con-
trol group is outlined be low. The software loads a p redefined configuration when the selection is made from
the Quick-Setups se ction
FPGA Routing - Includes cont rols to setup the FPGA fo r using the S/PDIF or the PSIA test interface and for
setting up clock and signal routing for CS42L55 master/slave mode.
CS8416 S/PDIF Receiver Control - Register controls for setting up the CS8416.
CS8406 S/PDIF Transmitter Control - Register contr ols for setting up the CS8406.
CS8421 SRC Control - Register controls for the receive and transmit SRC’s. To configure, select the desired
SRC from the first drop down box and click update.
Update - Reads all registers in all devices and reflects the current values in the GUI.
Reset - Resets all devices to default configuration.
Figure 4. Board Configuration Tab