Instruction Manual

7 AN333
Post-processing Overlays (continued)
SPP (Standard Post Processing) in DSP Composer Module
Processing Order:
1. Tone Control
2. BM
3. Delay
4. AM
See individual module application notes.
01, 03, 05, 07, 09 — — —
APP (Advanced Post Processing) in DSP Composer Mod-
ule Processing Order:
1. Tone Control
2. ReEQ
3. BM
4. EQ
5. Delay
6. AM
See individual module application notes.
01, 03 — — —
Table 2-1. Firmware Module Read and Write Addresses with Associated Application Note Reference (Cont.)
DSP Firmware Module / (Application Note Name)
Supported Memory Map(s)
(Firmware Version)
Write Request Read Request Read Response