Owner manual

52 AN269REV1
AN269
Appendix A: Example HSYNC/VSYNC-Style LCD Display - LG/Philips’s LB064V02-B1
The display used in this example is an LG/Philips LB064V02-B1. Relevant specifications taken from the datasheet
are as follows:
The first step in setting up the EP93xx raster engine for this display involves determining the proper
SPCLK rate. Using the equations from section “Setting Up Display Timing” on page 16:
tHORIZ = tHACTIVE + tHFRONTPORCH + tHSYNC + tHBACKPORCH
tHORIZ = 640 + 24 + 96 + 40 = 800 (SPCLK periods)
tVERT = tVACTIVE + tVFRONTPORCH + tVSYNC + tVBACKPORCH
tVERT = 480 + 10 + 2 + 33 = 525 (HSYNC pulses)
fVSYNC = 60 Hz
VIDCLK = tHORIZ * tVERT * fVSYNC
VIDCLK = 800 * 525 * 60 = 25200000 SPCLK periods per second (25.2 MHz)
Now that the VIDCLK rate is known, the source of that clock must be determined. This is done using the algorithm
shown in Section 3 For this example we will use the actual frequency (not 2x the frequency) and the possible PDIV
Item MIN TYP MAX UNIT
DCLK Frequency 22 25 28 MHz
Hsync Width 24 96 144 DCLK pulses
Vsync Width 2 2 - Hsync pulses
Vsync Frequency 55 60 65 Hz
Horizontal Valid 640 640 640 DCLK pulses
Horizontal Back Porch 16 40 - DCLK pulses
Horizontal Front Porch 16 24 - DCLK pulses
Horizontal Blank 56 160 (non-active area) DCLK pulses
Vertical Valid 480 480 480 Hsync pulses
Vertical Back Porch 2 33 - Hsync pulses
Vertical Front Porch 2 10 - Hsync pulses
Vertical Blank 6 45 (non active area) Hsync pulses
Table 14. LB064V02-B1 Specifications