Owner's Manual

10
CAUTION: Unplug the vacuum cleaner
before performing any of these steps.
The nozzle hose carries the dirt from the
nozzle to the vacuum bag. If the hose
should become clogged:
1. Pull out and turn the lid of the
accessory attachment opening.
Remove the clog or blockage (Fig. 1).
2. If the above step is not enough,
remove hose cuff from the
attachment port inlet (Fig. 2). If you
haven’t located the clog, turn the
vacuum cleaner over and remove
the bottom plate. Check nozzle inlet
tube for obstructions (Fig. 3). Clear
tube and reinstall the bottom plate.
HOW TO CLEAN THE NOZZLE HOSE
Fig. 1
Fig. 2
Fig. 3