User`s guide

ManualsBrandsCirronet ManualsComputer equipmentSEM2410

Table Of Contents

SEM2410

Bridge Commands

Command Description

help

Displays help screen for command

access <accesscode>

Sets access code to allow slave SEM onto to

Master’s network. Slave accesscode must match

accesscode of desired Master

filter [disable, bcast,

mcast, show]

Selects filtering operation and level.

Enables/disables accesscode/password login

authentication. Must be set in master and slave

master

Sets SEM as Master bridge

password <pwrd>

Sets login password. Slave password must match

password of desired Master SEM

slave

Sets SEM as Slave bridge (default)

bridge

status

(Master only)

Displays status of active connections

access Sets the accesscode portion of the accesscode/password pair to allow slave

SEMs to connect to a master SEM.

accesscode must match the accesscode in the

master SEM.

filter Selects Ethernet traffic filtering mode.

filter disable turns filtering off. filter bcast filters out broadcast and

multicast packet while

filter mcast filters out just multicast packets. filter

show

displays the filter settings.

accesscode and password must be entered in the slave SEM that matches the

accesscode and password of the master SEM with which the slave SEM wants to

establish a connection. Note that the network number of the SEMs must also agree.

See the section Radio Commands for details on the network number. This feature

prevents unauthorized SEMs from connecting to a SEM network.

master Sets the SEM as the Master SEM.

password Sets the

password portion of the accesscode/password pair to allow slave SEMs

to connect to a master SEM. Password must match the password in the master SEM.

slave Sets the SEM as a Slave SEM.

status Displays the status of active slave SEM connections. (Only available in the master

SEM.)