User`s guide

HN-2010

Configuring the Network

Overview

Introduction

You can configure the HopNet network using a PC and the WinCom 24 software

provided by Cirronet, Inc. WinCom24 is a software package that runs under Windows

95/98/NT/2000/XP. This chapter provides the information you need to configure your

network.

The HN-2010 is shipped from the factory initially configured as a remote with a

9600k baud rate.

Five Command Types

The WinCom24 software enables you to configure five types of commands:

• Serial Interface Commands

• Network Commands

• Protocol Commands

• Status Commands

• Memory Commands