User`s guide

HN-2010

Antenna and Power Connections

There are three external connections going into the repeater enclosure and one

internal connection:

• Two RF ports

• A 2-pin Conxall power connector

• An internal DB-9 connector

RF Antenna Connectors

The two RF antenna connectors are standard female TNC. These ports connect to the

output of each internal modem. You can attach remote antenna cables to these

connectors.

Conxall Power Connector

The Conxall power connector is waterproof and specifically engineered for industrial

use. This connector supplies 9 VDC nominal operating power to the HN-2010

Repeater. The view below is looking at the connector on the front of the HN-2010.

1 Ground

2 VCC