User`s manual

CR-SEH

Bridge Commands

Command Description

help

Displays help screen for command

access <accesscode>

Sets access code to allow slave CR-SEH onto to

Master’s network. Slave accesscode must match

accesscode of desired Master

filter [disable, bcast,

mcast, show]

Selects filtering operation and level.

Enables/disables accesscode/password login

authentication. Must be set in master and slave

master

Sets CR-SEH as Master bridge

password <pwrd>

Sets login password. Slave password must match

password of desired Master CR-SEH

slave

Sets CR-SEH as Slave bridge (default)

bridge

status

(Master only)

Displays status of active connections

access Sets the accesscode portion of the accesscode/password pair to allow slave CR-SEHs

to connect to a master CR-SEH.

accesscode must match the accesscode in the master

CR-SEH.

filter Selects Ethernet traffic filtering mode.

filter disable turns filtering off. filter bcast filters out broadcast and multicast

packet while

filter mcast filters out just multicast packets. filter show displays the

filter settings.

password must be entered in the slave CR-SEH that matches the accesscode and password of

the master CR-SEH with which the slave CR-SEH wants to establish a connection. Note that

the network number of the CR-SEHs must also agree. See the section Radio Commands for

details on the network number. This feature prevents unauthorized CR-SEHs from

connecting to a CR-SEH network.

master Sets the CR-SEH as the Master CR-SEH.

password Sets the

password portion of the accesscode/password pair to allow slave CR-SEHs to

connect to a master CR-SEH. Password must match the password in the master CR-SEH.

slave Sets the CR-SEH as a Slave CR-SEH.

status Displays the status of active slave CR-SEH connections. (Only available in the master CR-

SEH.)

 2000- 2004 Cirronet Inc 21 M-2411-0013 Rev A