User`s manual

CR-SEB
Bridge Commands
Command Description
help
Displays help screen for command
access <accesscode>
Sets access code to allow slave CR-SEB onto to
Master’s network. Slave accesscode must match
accesscode of desired Master
filter [disable, bcast,
mcast, show]
Selects filtering operation and level.
login [enable|disable]
Enables/disables accesscode/password login
authentication. Must be set in master and slave
master
Sets CR-SEB as Master bridge
password <pwrd>
Sets login password. Slave password must match
password of desired Master CR-SEB
slave
Sets CR-SEB as Slave bridge (default)
bridge
status
(Master only)
Displays status of active connections
access Sets the accesscode portion of the accesscode/password pair to allow slave CR-SEBs
to connect to a master CR-SEB.
accesscode must match the accesscode in the master
CR-SEB.
filter Selects Ethernet traffic filtering mode.
filter disable turns filtering off. filter bcast filters out broadcast and multicast
packet while
filter mcast filters out just multicast packets. filter show displays the
filter settings.
login Turns the authentication login requirement off and on. When on, Enabled, an accesscode and
password must be entered in the slave CR-SEB that matches the accesscode and password of
the master CR-SEB with which the slave CR-SEB wants to establish a connection. Note that
the network number of the CR-SEBs must also agree. See the section
Radio Commands for
details on the network number. This feature prevents unauthorized CR-SEBs from
connecting to a CR-SEB network.
master Sets the CR-SEB as the Master CR-SEB.
password Sets the
password portion of the accesscode/password pair to allow slave CR-SEBs to
connect to a master CR-SEB. Password must match the password in the master CR-SEB.
slave Sets the CR-SEB as a Slave CR-SEB.
status Displays the status of active slave CR-SEB connections. Only available in the master CR-
SEB.
 2000- 2004 Cirronet Inc 20 M-2410-0025 Rev A