Instructions

3.2.- INSTALLATION
On the side of the device are all of the indications adjusted to the CEI 62052-11 standard.
The device is installed on a DIN rail.
Before connecting the device, you must couple it to a CEM energy meter as shown in Figure 1
and Figure 2.
Figure 1: Coupling the CEM M-RS485 to a CEM energy meter�
Figure 2: Coupled CEM M-RS485 and CEM�
Terminals, opening covers or removing elements can expose parts that are haz-
ardous to the touch while the device is powered. Do not use the device until it is
fully installed.
8
CEM M-RS485
Instruction Manual