Quick Start Guide
Fluance Ai81 Quick Start Guide
Product Setup
1. Position the speakers with the Active Speaker on the right and the Passive Speaker
on the left.
Passive Speaker
Active Speaker
NOTE: If placing the speakers near a wall, it is recommended to keep 6-12inches
away from the wall.
NOTE: The included speaker wire is 12ft. If placing your speakers further than 12ft
apart it is recommended to use standard 18 gauge speaker wire to connect the
speakers over the longer distance.
2. Connect one end of the speaker wire to the binding posts on the back of the
Active Speaker and connect the other end of speaker wire to the binding posts on the
back of the Passive Speaker.
IMPORTANT: Ensure the same wire is connected to the same color binding post on
each speaker.
Loosen the
binding post
Insert speaker
wire through
hole
Tighten the
binding post
3. Connect the power cable to the back of the Active Speaker and set the power switch
to the ON position.
Passive
Speaker
Active
Speaker