Datasheet

Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Commission Regulation (EU)

2015/830

CircuitWorks® Conformal Coating Remover Pen

Keep container in a cool, well-ventilated area. Avoid all possible sources of ignition (spark or flame).

SECTION 7: Handling and storage

The information in this section contains generic advice and guidance. The list of Identified Uses in Section 1 should be

consulted for any available use-specific information provided in the Exposure Scenario(s).

7.1 Precautions for safe handling

Protective measures

Advice on general

occupational hygiene

7.2 Conditions for safe storage, including any incompatibilities

7.3 Specific end use(s)

Recommendations

Industrial sector specific

solutions

Not available.

Put on appropriate personal protective equipment (see Section 8). Do not ingest.

Avoid contact with eyes, skin and clothing. Avoid breathing vapour or mist. Avoid

release to the environment. Use only with adequate ventilation. Wear appropriate

respirator when ventilation is inadequate. Do not enter storage areas and confined

spaces unless adequately ventilated. Keep in the original container or an approved

alternative made from a compatible material, kept tightly closed when not in use.

Store and use away from heat, sparks, open flame or any other ignition source. Use

explosion-proof electrical (ventilating, lighting and material handling) equipment.

Use only non-sparking tools. Take precautionary measures against electrostatic

discharges. Empty containers retain product residue and can be hazardous. Do not

reuse container.

Eating, drinking and smoking should be prohibited in areas where this material is

handled, stored and processed. Workers should wash hands and face before

eating, drinking and smoking. Remove contaminated clothing and protective

equipment before entering eating areas. See also Section 8 for additional

information on hygiene measures.

Seveso Directive - Reporting thresholds (in tonnes)

Danger criteria