Specifications

Sicon-8 Technical Manual CircuitWerkes, Inc.
6
Contacting CircuitWerkes
For help with setting up or operating the Sicon-8, please contact us at the following:
Phone: [phone]
E-mail: [e-mail]
Website: www.circuitwerkes.com
Unpacking your Sicon-8
Note: CircuitWerkes is not responsible for product damage during shipment. Inspect your
shipment carefully for external signs of damage. CircuitWerkes suggests that you unpack your
shipment as soon as possible after receipt to inspect it for signs of damage that might not be
visible from the outside. If the shipment appears to be damaged, keep the original boxes and
packing material for inspection by the carrier. All damage claims should be made directly to the
carrier. Do not delay. Call the carrier as soon as damage is discovered.
You should have received the following items with each Sicon-8 that you have purchased:
[ ] (4) depluggable screw terminal strips (12 positions each)
[ ] (13) depluggable screw terminal strips (3 positions each)
[ ] (1) Telephone cord
[ ] (1) IEC Cable (older) or 9V regulated adapter (new Sicon-8s)
[ ] (1) Sicontroller Software CD
[ ] (1) Analog Temperature Sensor PCB
[ ] (1) Network cable (supplied at our option)
[ ] (1) USB cable (supplied at our option)
If you purchased the optional Sicon-8 Expander unit, you should have received the following items
for each SX-8:
[ ] (4) depluggable screw terminal strips (12 positions each)
[ ] (13) depluggable screw terminal strips (3 positions each)
[ ] (1) Sicon Interface Cable
Note: instructions for installing the SX-8 expansion chassis are located near the end of this manual, just
before the product specifications page.
If you have not received all of the items shown with your shipment, please carefully check inside
the box or boxes because items occasionally get lost in the packing materials and can be hard to
find. If your items are not found, please call CircuitWerkes at 352-335-6555 or e-mail us at
[e-mail].
In case your Sicon-8 is in need of service our shipping information is as follows:
CircuitWerkes, Inc.
Attn: RMA #
2805 NW 6
th
Street
Gainesville, Florida, 32609, USA
Please obtain an RMA from us and verify the address before returning any products.