Specifications
49
order/info: 1·800·426·8434 • www.bswusa.com
CircuitWerkes HC-3
Hybrid Telephone Auto Coupler
The HC-3 automatically answers your phone line on
a programmable number of rings. It features a simple
hybrid circuit that separates incoming and outgoing
telephone audio, bridging balanced audio input with
a send level control and a low impedance balanced
output. The HC-3's features make it ideal for a variety of
telephone tasks such as listen lines, concert lines and
remote broadcasting. Dry relay contacts close at pickup.
FEATURES:
Auto-answer and auto-hangup•
Remote pickup and hangup control •
for manual operation
Simple hybrid circuit for bidirectional •
audio connection
Built-in tone generator for setting hybrid null•
All connections made to screw terminals•
LED’s for incoming ring/on line, and power •
indications
HC3 List $279.00
CircuitWerkes CP-2
Standalone Call
Progress Detector
The CP-2 allows any automatic telephone coupling
device to hang up properly on PBX or other telephone
lines that don't provide the customary end of call d.c.
signaling. It is designed to be used with all telephone
devices, regardless of maker.
CP2CIRC List $189.00
CircuitWerkes DT-232
Dial-up
Controller and Universal
DTMF-to-ASCII Transceiver
The DT-232 is an affordable dial-up remote control
offering DTMF access to four user-programmable relays
that can be programmed to respond to any DTMF tone
or sequence. With the ability to interface to virtually any
piece of hardware that requires serial control or input,
the DT-232 receives DTMF tones from either its audio
input connector or from its built-in telephone auto
coupler. It can also accept ASCII input from its serial
port and generate DTMF tones that are transmitted
to a phone line for controlling equipment in remote
locations. It comes with a Windows program for easy
control and programming.
DT-232 List $289.00
CircuitWerkes Sicon-8
Recordable,
Talking Remote Control
The CircuitWerkes Sicon-8 is an
affordable, full-featured dial-up remote control based
on proprietary voice recording technology that lets you
record your own messages, in any language. A complete
solution for facilities with basic to moderate control
requirements, all of its I/O, including 8 channels of relays,
are included on the main board, with all metering, status
and control connections are on depluggable screw
terminals. Designed to be controlled from its onboard
Ethernet interface, any dial-up telephone, an auto-answer
cell phone or its serial port, the Sicon-8 gives you plenty
of control options. Its onboard Web server gives access
to all of the Sicon-8's metering, Status and basic control
functions and supports several simultaneous users with 4
different access levels. The Web server requires no software
other than a Java capable Web browser to operate, and
works on multiple operating systems and browsers.
SICON8 List $1,299.00
CircuitWerkes Sub-03
Subaudible Tone Decoder
The CircuitWerkes Sub-03 can automate your network
feeds or take the guesswork out of when to cut away
from networks. The decoder listens to your network
audio and gives you dry contact closures from any
service that sends subaudible tones including satellites,
RPUs, ISDN loops and more. Its relay contacts interface
easily with your automation system. It accepts a wide
range of input audio signals, and its fully adjustable,
active, balanced output can be used to feed your
equipment. Internal filters greatly reduce the presence
of tones in the output.
SUB03 List $395.00
CircuitWerkes SEN-6
Subaudible Tone Encoder
The SEN-6 subaudible encoder generates 25, 35, and
combo 25/35 Hz tones. It features active balanced
audio !/O with gain control and integral filtering that
keeps audio source material from falsely activating
decoders. It can be special ordered to generate 50, 75,
and combo 50/75 Hz tones.
SEN6 List $449.00
CircuitWerkes REX
Relay
Distribution System and Expander
The REX relay expander is a versatile tool to multiply
contact closures in your facility. It accepts a wide variety
of input signals and converts them to contact closure
outputs. Its optocoupled inputs can be driven from
active high or low incoming signals. The relays can also
be direct driven by changing a jumper. Each of the six
inputs controls four SPST relays for a total of 24 outputs.
Inputs can be paralleled to increase the number of
simultaneous relay outputs. It features a 50-pin SCSI (RJ-
21) type connector that interfaces easily with prewired
telco punchblocks.
REX List $189.00
CircuitWerkes DS-8
Programmable DTMF Switcher
The DS-8 is a DTMF sequence decoder providing dry closures for eight different tone
sequences. It can decode 1 to 4 digit DTMF sequences used by networks for
automating closed-circuit feeds and local insertions. Relays can be easily programmed
via DTMF phone to operate in momentary, latching, or interlocked latching modes.
DS8 List $299.00
CircuitWerkes DR-10
Dial Up Remote Control
The DR-10 is a user programmable remote control
that lets you operate your station's equipment from
anywhere there's a phone. It automatically answers the
phone and waits for you to enter your password, after
which you have complete control of the DR-10's relays.
They can be individually programmed for momentary,
latching or interlocked operation, and each relay can
be programmed to decode any of the 16 DTMF tones.
It features a two-tone sequence mode and an anti-
falsing delay mode that prevent accidental contact
closures when you're using it for remote broadcasts. A
built-in audio hybrid lets you control equipment while
monitoring a local audio source.
DR10 List $399.00
Lowe st Pr ic e
only $249!
Lowe st Pr ic e
only $299!
Lowe st Pr ic e
only $219!
TELEPHONE HYBRIDS AND ACCESSORIES / CODECS
Lowe st Pr ic e
only $175!
Lowe st Pr ic e
only $399!
Lowe st Pr ic e
only $359!
Lowe st Pr ic e
only $159!
Lowe st Pr ic e
only $269!
Circuitwerkes
Auto Coupler Rack System
The AC-12 fits up to 12 AC1B auto-couplers (sold
separately). It offers two balanced bridging input,
switchable busses for audio distribution. Each coupler
card has an individual 600 ohm bi-directional audio
connection with level trim.
FEATURES:
•LEDsforring,on-lineandclipping
•Strappableinputattenuatorwhichacceptsawide
range of input signals
•Individualrelayisolated,user-selected,momentary
or latching dry contacts
AC12 Mainframe List $379.00
$
339
00
AC1 Coupler card List $199.00
$
185
00
CP1 Call progress decoder List $119.00
$
112
00
Lowe st Pr ic e
from $112!
CircuitWerkes DTMF-16
DTMF Decoder
The CircuitWerkes DTMF-16 is a compact and rugged
remote control unit that provides 16 optocoupled outputs
using standard TouchTone signals. It excels in controlling
remote satellite receivers, network switching equipment,
repeaters, or virtually any application where local control
is inconvenient or impossible. Simply connect the DTMF-
16's bridging input across an audio line and its outputs will
activate whenever a DTMF tone is received.
DTMF16 List $229.00
Lowe st Pr ic e
only $209!
Call BSW For Lowest Price: 800-426-8434