Specifications
order/info: 1·800·426·8434 • www.bswusa.com
48
Conex FlipJack 700
4-Channel
Cellphone Interface
The FJ700 is loaded with a 4-channel
mixer boasting mic and line level inputs,
with balanced XLR connectors and 1/4"
unbalanced inputs. Use with most cell
and land line phones. Four headphone
channels. “AA” batteries or AC power.
FJ700 List $498.00
Marti GX-500
Telephone Interface
The GX-500 telephone
interface and mixer provides
all the features you need
for great-sounding remotes
through a standard phone line.
Marti Digital Cellcast
Cellphone/Mixer
The Digital Cellcast provides
a Versatile cellphone/mixer
combination for use with digital
cell phone networks. The latest
version is updated for GSM
wireless service.
FEATURES:
• Operate on land line or
cellular system
• 4-channel mixer with line in, line out; pots for the 4 mic and headset channels
• Inputs switchable – program or cue
• 20 position memory for speed dial
• VU meter for program bus; A/C, battery (included) or 12V DC auto
DCELLCAST List $3,300.00
FEATURES:
• 4 mic and 2 aux inputs
• 4 headphone jacks
• Peak limiter
• Squelch/mute switch
• Tone/pulse dialing and electronic ringer
• Rechargeable batteries or AC supply
• Aux output (line or mic level)
GX500 List $1,295.00
Call BSW For Lowest Price: 800-426-8434
Call BSW For Lowest Price: 800-426-8434
Conex FlipJack Series
Cellphone Interfaces w/Mixers
The Conex FlipJacks are affordable
cellphone interfaces. The FlipJack
FJ500 offers a 3-channel mixer for
cellular broadcasts. The original
FlipJack is a smaller, 2-channel version.
Both use your phone’s 2.5 mm hand-free
port (or 2.5 mm adaptor). Includes cable.
FJ500 FEATURES:
• 2 XLR inputs (mic and mic/line)
• Aux line input and output
• Tuner input for off-air monitoring
• 2 headphone outs w/ volume ctrl
• Connects to a standard phone line
• “AA” batteries or external power
• Multi-LED level indicator
FLIPJACK FEATURES:
• 2 XLR inputs (mic and mic/line)
• 1 headphone out with volume ctrl
• Separate external tuner/aux input
• Powered by internal 9V battery
• LED level and low battery indicators
FJ500 List $417.90
$
399
00
FLIPJACK List $289.00
$
255
00
Lowe st Pr ic e
from $255!
FLIPJACK
FJ500
Lowe st Pr ic e
only $449!
New Bluetooth wireless tap! The Daptor Three audio
interface offers Bluetooth wireless as well as balanced
XLR and unbalanced 3.5 mm connections to let you
send and receive audio through your cell phone. It also
works great with any laptop that has a wireless headset
connection! Ruggedly built, yet weighing just 7 ounces,
it runs on a single 9-volt battery. The non-Bluetooth
Daptor Two lets you connect any mixer to the 2.5
mm headset jack on your wireless phone. This passive
adaptor features balanced XLR and unbalanced 1/4"
jacks (you may use either the XLR input or 1/4" input,
not both). You can send and receive audio from your
mixer or recorder through your cell phone. The Daptor
One converts the 2.5mm headset jack on your wireless
cellular phone to a modular phone line jack. This RJ-11
jack connects directly to any JK Audio RemoteMix series
Lowe st Pr ic e
from $55!
JK Audio
Telephone Taps
mixer. Connect the JK Audio THAT1 or THAT2 between
your telephone and handset for quick access to audio
in and out of the telephone. THAT1 has RCA I/Os. THAT2
adds XLR I/O and a handset selector switch.
To record audio from your cellphone connect the CellTap
between the 2.5 mm earpiece jack of your cellphone and
your earpiece. It features a 3.5 mm audio output.
Use QuickTap between your standard telephone and
handset for access to audio out of any telephone. Simply
connect your audio equipment to the audio output jack.
VoicePath routes audio in and out of any telephone
using your PC sound card. Use PC software to play your
conversation right back into the phone line.
DAPTORTHREE Bluetooth w/ XLR & 3.5mm
$
339
95
DAPTORTWO 2.5 mm tap w/ XLR & 1/4"
$
159
00
DAPTORONE 2.5 mm tap w/ RJ-11
$
109
00
THAT1 Telephone audio tap w/RCA
$
139
00
THAT2 Telephone audio tap w/XLR
$
215
00
CELLTAP 2.5 mm cellphone audio tap
$
75
00
QUICKTAP Telephone audio tap
$
55
00
VOICEPATH Phone tap with software
$
99
00
Digigram Pyko MP3 Audio Encoder and Decoder System
When distributing digital audio over a shared IP network, the Digigram PYKO-in and PYKO-out offer professional IP
solutions for a large scope of applications, such as transportation, industrial, background music, paging, and broadcast.
PYKO units may be used “as is”, without additional software for simple setups through a standard HTML web browser. The
PYKO-In converts analog and digital audio sources to high quality MP3 or PCM IP streams. The PYKO-out plays audio from
standard MP3 or PCM IP streams or from locally stored MP3 files. A required power supply is sold separately (PYKOPS).
PYKO terminals have been designed with pro audio applications in mind: Mic/line input with gain control & phantom
power on the PYKO-in; balanced audio I/Os on terminal block connectors, +18 dBu max levels; 8 GPIOs, RS232; USB
port on the PYKO-out.
PYKOIN MP3 audio encoder List $660.00
PYKOOUT MP3 audio decoder List $470.00
PYKOPS Power supply List $55.00
Call BSW For Lowest Price: 800-426-8434
PYKO-IN
PYKO-OUT
TELEPHONE INTERFACES AND STLs