Specifications

10
See our web site for a full catalog: www.navair.com
NAVAIR
TECHNOLOGIES
Spectrum Analysis
EMC-PCS1
Frequency Range 100 kHz…1 GHz [3 GHz]
Tracking Generator HMS1010 [HMS3010] -20…0 dBm
Amplitude Measurement Range -114…+20 dBm DANL -135 dBm with Preamp.
Option HO3011
Sweep Time 20 ms…1000s
Resolution Bandwidth 100 Hz…1 MHz in 1–3 Steps, 200 kHz (-3 dB); additional
200 Hz, 9 kHz, 120 kHz, 1 MHz (-6 dB)
Spectral Purity <-100 dBc/Hz (@100 kHz)
Video Bandwidth 10 Hz…1 MHz in 1–3 Steps
Integrated AM and FM Demodulators (Phone and int. Speaker)
Detectors: Auto-, Min-, Max-Peak, Sample, RMS, Quasi-Peak
8 Markers with Delta Marker, miscellaneous Peak Functions
Crisp 16.5 cm (6.5”) TFT VGA Display, DVI Output
3 x USB for Mass-Storage, Printer and Remote Control
Frequency Range 100 kHz…1 GHz
Amplitude Measurement Range -104…+20 dBm
Sweep Time 20 ms…1000s
Resolution Bandwidth 10 kHz…1 MHz in 1–3 Steps, 200 kHz (-3 dB)
Spectral Purity <-100 dBc/Hz (@100 kHz)
Video Bandwidth 1 kHz…1 MHz in 1–3 Steps
Integrated AM and FM Demodulator (Phone and int. Speaker)
Detectors: Auto-, Min-, Max-Peak, Sample, RMS
8 Marker with Delta Marker, miscellaneous Peak Functions
Crisp 16.5 cm (6.5”) TFT VGA Display
3 x USB for Mass-Storage, Printer and Remote Control,
HMS1000
1 GHz Spectrum Analyzer
Frequency Range 100kHz…1GHz
Sweep Time 20ms…1000s
Resolution Bandwidth 1kHz…1MHz in 1–3 Steps,
200kHz (-3dB), additional 9kHz, 120kHz, 1MHz (-6dB)
Video Bandwidth 10Hz…1MHz in 1–3 Steps
HM6050-2
Line Impedance Simulation Network
Measurement of Line-conducted Interference
within the Range from 9kHz…30MHz (CISPR 16)
Switchable Transient Limiter
Artifi cial Hand Connector
HZ530
The HZ530 Probe Set consists of three active
broadband probes for EMI diagnosis.
H-fi eld probe
High-impedance probe
E-fi eld probe
HM Eplorer
Spectrum Analyzer software HM Explorer to make the
EMI pre complicance measurements.( support Standard
Interface HO720 RS232/USB and Windows
®
)
1GHz [3GHz] Spectrum Analyzer
HMS1000 [HMS3000]
1GHz Spectrum Analyzer
HMS1000E
EMC Precompliance Set 1 (1 GHz)
NEW
The EMI pre compliance Set from HAMEG consist of all necessary instruments and software to measure typical EMI
problems. It includes the modern spectrum analyzer HMS1000, the Line Impedance Stabilization Network HM6050-2,
the HZ530 probe set and the HM Explorer software for Windows.