User`s manual

This symbol advises the user that the terminal(s)

so marked must not be connected to a circuit point

at which the voltage with respect to earth ground

exceeds (in this case) 600 VAC or VDC.

WARNING

1. Set the function switch correctly before making any

measurements.

2. Do not operate the unit unless the case is completely

closed.

3. Disconnect test leads from equipment before removing

the battery.

4. Never connect unit to AC or DC powered circuits when

function switch is set to Ω, diode check or continuity.

5. To safeguard against electrical shock or damage to

instrument, never connect to more than 600V DC or

600V AC between input jacks and ground.

6. Always inspect the instrument, test leads and other

accessories for damage prior to use.

7. Read this instruction manual carefully and completely

before using.

SAFETY PRECAUTIONS

High voltage AC and DC circuits are dangerous. Always

consider circuits to be energized. Never assume any equip-

ment is de-energized. Lack of caution or poor safety practices

can be very dangerous and/or lethal.