User`s manual

Battery Good Weak Bad

9V > 8.2V 7.2 to 8.2V < 7.2V

1.5V > 1.35V 1.22 to 1.35V < 1.22V

MAINTENANCE

1 BATTERY REPLACEMENT

WARNING: Disconnect both test leads from any

equipment before removing back cover. Do not use the

meter with the case opened.

1-1 Disconnect both test leads and turn off the power.

1-2 Remove the screws in the rear cover of the case and

remove the cover.

1-3 Unsnap the battery from the connector and replace with

a new 9V battery.

1-4 Replace the cover and cover screws.

2 FUSE REPLACEMENT

WARNING: Disconnect both test leads from any

equipment before removing back cover. Do not use the

meter with the case opened.

2-1 Disconnect both test leads and turn off the power.

2-2 Remove the screws in the rear cover of the case and

remove the cover.