User`s manual

– 6 –
SPECIFICATIONS
GENERAL
Display: 3
3
/
4
digit 4000 count LCD
Maximum Display: 3999
Ranging: Auto
Auto Shut-off: Meter will shut-off after 15 minutes from last use
Polarity: Automatic, minus (-) sign indicates negative polar
-
ity, no sign for positive polarity
Input impedance: 10M
(DCV / ACV)
Continuity: Audible signal sounds if resistance is less than 36
(Note: The display will read up to 400.0 in continu-
ity mode)
Over range indication: a) In Continuity Check: 400.0
& appears on
the display with ʻ4ʼ flashing
b) In Resistance Mode: 40.00M
appears on the
display with ʻ4ʼ flashing
Operating Temp: 0 to 50° C (32 to 122° F)
Relative Humidity: <80% Operating/Storage
Power Source: 1 x 9V Battery
Overload Protection: This meter is protected in the Resistance Range by
PTC (Positive Temperature Coefficient) up to 600V
Temperature Probe: 'K' Type Thermocouple rated at 0° to 500°F
(Model no. TL-190)
Dimensions: 90(H) x 232(W) x 45(D) mm
(3
1
/
2
x 9
1
/
8
x 1
3
/
4
")
Weight: 390g (13.75 oz)
Accessories included: One pair of test leads, 1 x 9V battery,
ʻKʼ type thermocouple, Screw-on Alligator clips,
Carrying Case, Userʼs manual