Technical information

Easy Automotive Modules
Evaluation Kit EASYKIT AUX DRIVES (FS50R07W1E3_B11A)
Experimental Results
Application Note 37 AN2012-10
Evaluation Kit EASYKIT AUX DRIVES (FS50R07W1E3_B11A)
6.3.1 IGBT Turn-on (300V, 25A, 150°C)
The simplified circuit of the IGBT turn-on testbench is shown in Figure 28. Please note that the
environmental conditions are different from a standard characterization testbench, where the maximum
module performance is characterized. The gate driver has in this setup +15V/0V supply and Rg,on=2.2Ω. No
booster stage is implemented. The gate driver achieves in this case ≈0.7A peak current.
Figure 28 Equivalent circuit of the IGBT turn-on testbench. DUT is the low right IGBT. The low side
shunt is bridged and the current Ic is measured with a Rogowski current probe. The waveforms are
measured during the second turn-on pulse.
HV
Supply
System
<450V
Vce
IL
Vge
Ic
Trigger