Technical information

Easy Automotive Modules
Evaluation Kit EASYKIT AUX DRIVES (FS50R07W1E3_B11A)
Operating Modes and LED status
Application Note 21 AN2012-10
Evaluation Kit EASYKIT AUX DRIVES (FS50R07W1E3_B11A)
The second part of the passive procedure checks the temperatures of the PCB and Module and cancels
small current sensor offsets. The test procedure with the following switching test is only started if the
Evaluation Kit is not in overvoltage lookout condition.
Figure 13 Overview of the passive self test sequence. Part 2 to check ADC limit values.