Technical information

Easy Automotive Modules
Evaluation Kit EASYKIT AUX DRIVES (FS50R07W1E3_B11A)
Feature Description
Application Note 14 AN2012-10
Evaluation Kit EASYKIT AUX DRIVES (FS50R07W1E3_B11A)
3.2 Protection Features
The protection features in this Evaluation KIT are limited. Please take note that testing beyond maximum
rating may lead to device failures and damages. Infineon will not take any liability for failures on the
Evaluation KIT as well as damage on lab equipments.
The design is not protected against:
X Overtemperature
X DCL Overvoltage (>450V)
X Reverse polarity. (Only on 8-18V LV supply)
X Overcurrent, Overvoltage on FAN output
Following protection features are implemented and activated:
 Overcurrent 8-18V supply with self restart (hiccup-mode)
 Reverse polarity protection 8-18V supply (up to -20V)
 Gate Driver Under voltage Lockout (UVLO)
 Gate Driver not Ready event locks all other Channels
 Shoot-through protection
 IGBT desaturation/short circuit (and overcurrent on low side IGBTs)
 DCL under- and overvoltage lockout (stop switching operation only)
3.3 Key Components BOM
Part
Description
Manufacturer
Status
FS50R07W1E3_B11A
Easy 1B Automotive B6-bridge with IGBT3
and Emitter Controlled Diode 3 650V/50A
Infineon
Productive
2ED020I12FA
EiceDriver™ 2A Dual Channel Gate Driver
Infineon
Productive
SAK-XC2768X
16/32-Bit Single-Chip Microcontroller
Infineon
Productive
TLE8250G
CAN Transceiver
Infineon
Productive
BSO604NS2
Dual 55V, 35mΩ OptiMOS™
Infineon
Productive
TLE7274-2D
5V LDO linear voltage regulator
Infineon
Productive
T7509
SMD Gate Driver Supply Transformers 1:1.1
5mm clearance/creepage
TDK/Epcos
*
B32776G4406+000
450V 40uF MKP foil DCL Capacitor
TDK/Epcos
*
* For status and datasheets of the passive TDK/Epcos components please ask [e-mail].