Technical information

Easy Automotive Modules
Evaluation Kit EASYKIT AUX DRIVES (FS50R07W1E3_B11A)
Quick Start Guide
Application Note 10 AN2012-10
Evaluation Kit EASYKIT AUX DRIVES (FS50R07W1E3_B11A)
2.3 Operation of Power Board only
Some investigations, like typical double pulse switching tests, are easier to perform without a control board
and software. The pulse patterns are generated here from a function generator.
For such an operation, the power board needs some minor modifications. Three zero ohm bridges has to be
placed. The location for these bridges are illustrated in Figure 6.
Figure 6 Three required 0Ω bridges if tests without control board has to be performed.
The required signals on the connectors for power board only operation is described in Section 2.3.1.
0Ω bridges
PIN1