Specifications

13
Operations Scanner Demonstration Program
Special Functions
This selection opens a menu of unique tests, such as relearn procedures. Follow the on-screen
instructions to check status and reprogram learned values.
Review Coding
This test displays the programmed VIN number and other relevant information.
Review ECU ID
This test displays ECU identification information. Highlight and select Review ECU ID to access
the information. The display may take more than one screen, scroll to read the complete test
results.
Stop Communication
This selection severs the communication link between the Scanner and the vehicle ECU. Use it
to end a test session before switching the Scanner off or disconnecting the data cable.
Scanner Demonstration Program
The Mercedes-Benz software contains programs that demonstrate test capabilities without
connecting to a vehicle. The demonstration program can help you become familiar with Scanner
menus and operation by providing mock data and test results for a sample vehicle ID. The
demonstration program is accessed at the vehicle identification phase of Scanner operations.
z To access a demonstration:
1. Open the Mercedes-Benz database.
2. Highlight and select Training Mode.
A series of vehicle identification screens display.
3. Select a vehicle identification
The System Selection menu displays and you are in demonstration mode.