Specifications

Data Parameters Transmission Parameters

UNFILTERED SELECTOR LEVER POSITION

Range: ___________________________________________________________PN/RD1

Used on EGS, ERE/EVE/ASF, HFM, LH, ME10, ME20, ME27, and ME28 systems. These

parameters indicate the gear selector lever position. The display shows selected range position,

not the current operational transmission gear.

W/S PROGRAM SELECTION SWITCH

Range: ______________________________________________________________ W/S

Used on the EGS system. This parameter displays whether the electronic transmission controller

(ETC) has engaged the winter drive program (W). “S” indicates that the ETC is operating using

the standard drive program.

To drive the vehicle using the standard drive program, start the engine with the W/S switch in the

“S” position. The transmission automatically starts in 1st gear.