User's Manual

OG_MU-D1-R_v099Fe Circuit Design, Inc.
10
OPERATION GUIDE
The frequency channels that the MU-D1-R can use are channels 1 to 20 in the 915 MHz band.
To set the channel, use the command format ‘@CH + channel number’.
Example: Set channel 15 as the channel to use.
Specify the channel following ‘@CH’ with 2 ASCII (hexadecimal) characters.
Control command: @CH 0F CRLF
Control response: *CH = 0F CRLF
* : Default channel
MU-D1-R 915 MHz
Channel Frequency Channel Frequency
Dec. (Hex) MHz Dec. (Hex) MHz
1(01) 905.5 11(0B) 915.5
2(02) 906.5 12(0C) 916.5
3(03) 907.5 13(0D) 917.5
4(04) 908.5 14(0E) 918.5
5(05) 909.5 15(0F) 919.5
6(06) 910.5 16(10) 920.5
7(07) 911.5 17(11) 921.5
8(08) 912.5 18(12) 922.5
9(09) 913.5 19(13) 923.5
10(0A) 914.5 20(14) 924.5
2.3 Channel Table