User's Manual

OG_KST24_v
7
By pressing and holding the power button
communication with the
L
While the power is on, communication is performed regardless of the state of
so you can determine whether communication is possible before oper
By pressing and holding the power button while the power is on, the power is turned off
a buzzer sound.
initial setting) the button 1 to 4 are not operated, the power tur
the mute setting is ON, it does not sound that the buzzer does not occur
us for changes in auto power off time.
I
the
*When the mute setting is ON, the buzz
*
8
Since the
operated
transmitted to the
*When the mute setting is ON, the buzzer does no function.
9
With the
The mute
OG_KST24_v
7
.
By pressing and holding the power button
communication with the
L
ink LED
While the power is on, communication is performed regardless of the state of
so you can determine whether communication is possible before oper
By pressing and holding the power button while the power is on, the power is turned off
a buzzer sound.
initial setting) the button 1 to 4 are not operated, the power tur
the mute setting is ON, it does not sound that the buzzer does not occur
us for changes in auto power off time.
I
f the state in which no button
the
*When the mute setting is ON, the buzz
*
For details on changing the auto power off time, please consult
8
.
Since the
operated
transmitted to the
*When the mute setting is ON, the buzzer does no function.
9
.
With the
The mute
OG_KST24_v
.
Power button
By pressing and holding the power button
communication with the
ink LED
While the power is on, communication is performed regardless of the state of
so you can determine whether communication is possible before oper
By pressing and holding the power button while the power is on, the power is turned off
a buzzer sound.
initial setting) the button 1 to 4 are not operated, the power tur
the mute setting is ON, it does not sound that the buzzer does not occur
us for changes in auto power off time.
f the state in which no button
the
auto
*When the mute setting is ON, the buzz
For details on changing the auto power off time, please consult
.
Buzzer sound
Since the
operated
transmitted to the
*When the mute setting is ON, the buzzer does no function.
.
Mute setting
With the
The mute
Step 1
Ste
Step
Step
Step
OG_KST24_v
Power button
By pressing and holding the power button
communication with the
ink LED
While the power is on, communication is performed regardless of the state of
so you can determine whether communication is possible before oper
By pressing and holding the power button while the power is on, the power is turned off
a buzzer sound.
initial setting) the button 1 to 4 are not operated, the power tur
the mute setting is ON, it does not sound that the buzzer does not occur
us for changes in auto power off time.
f the state in which no button
auto
-
*When the mute setting is ON, the buzz
For details on changing the auto power off time, please consult
Buzzer sound
Since the
operated
with
transmitted to the
*When the mute setting is ON, the buzzer does no function.
Mute setting
With the
KST
The mute
Step 1
Ste
p
Step
Step
Step
OG_KST24_v
Power button
By pressing and holding the power button
communication with the
ink LED
blinks
While the power is on, communication is performed regardless of the state of
so you can determine whether communication is possible before oper
By pressing and holding the power button while the power is on, the power is turned off
a buzzer sound.
initial setting) the button 1 to 4 are not operated, the power tur
the mute setting is ON, it does not sound that the buzzer does not occur
us for changes in auto power off time.
f the state in which no button
-
power
*When the mute setting is ON, the buzz
For details on changing the auto power off time, please consult
Buzzer sound
Since the
KST
with
transmitted to the
*When the mute setting is ON, the buzzer does no function.
Mute setting
KST
The mute
ON/OFF setting
Step 1
p
2
Step
3
Step
4
Step
5
OG_KST24_v
10e
Power button
By pressing and holding the power button
communication with the
blinks
While the power is on, communication is performed regardless of the state of
so you can determine whether communication is possible before oper
By pressing and holding the power button while the power is on, the power is turned off
a buzzer sound.
initial setting) the button 1 to 4 are not operated, the power tur
the mute setting is ON, it does not sound that the buzzer does not occur
us for changes in auto power off time.
f the state in which no button
power
*When the mute setting is ON, the buzz
For details on changing the auto power off time, please consult
Buzzer sound
KST
-
2.4W will emit a buzzer sound as an operation sound only when the buttons 1 to 4 are
with
communication established
transmitted to the
*When the mute setting is ON, the buzzer does no function.
Mute setting
KST
-
2.4W
ON/OFF setting
Hold down the power button while pressing
buttons 1 and 2
The buzzer sound
Release the button 1.
The buzzer sound changes after 3 seconds.
*The power turns
operation.
Release the button 2
The buzzer
*The power turns
operation.
Release the power button.
The buzzer pips
*The power turns
operation.
Press the button 1.
The buzzer
*To stop
button.
10e
Power button
By pressing and holding the power button
communication with the
blinks
in green, and the
While the power is on, communication is performed regardless of the state of
so you can determine whether communication is possible before oper
By pressing and holding the power button while the power is on, the power is turned off
a buzzer sound.
initial setting) the button 1 to 4 are not operated, the power tur
the mute setting is ON, it does not sound that the buzzer does not occur
us for changes in auto power off time.
f the state in which no button
power
-
off function
*When the mute setting is ON, the buzz
For details on changing the auto power off time, please consult
Buzzer sound
2.4W will emit a buzzer sound as an operation sound only when the buttons 1 to 4 are
communication established
transmitted to the
receiver unit.
*When the mute setting is ON, the buzzer does no function.
Mute setting
2.4W
ON/OFF setting
Hold down the power button while pressing
buttons 1 and 2
The buzzer sound
Release the button 1.
The buzzer sound changes after 3 seconds.
*The power turns
operation.
Release the button 2
The buzzer
*The power turns
operation.
Release the power button.
The buzzer pips
*The power turns
operation.
Press the button 1.
The buzzer
*To stop
button.
Power button
By pressing and holding the power button
communication with the
in green, and the
While the power is on, communication is performed regardless of the state of
so you can determine whether communication is possible before oper
By pressing and holding the power button while the power is on, the power is turned off
Also, if the auto power off function continues for 10 minutes (when the
initial setting) the button 1 to 4 are not operated, the power tur
the mute setting is ON, it does not sound that the buzzer does not occur
us for changes in auto power off time.
f the state in which no button
off function
*When the mute setting is ON, the buzz
For details on changing the auto power off time, please consult
Buzzer sound
2.4W will emit a buzzer sound as an operation sound only when the buttons 1 to 4 are
communication established
receiver unit.
*When the mute setting is ON, the buzzer does no function.
Mute setting
2.4W
, the buzzer sound can be muted by setting the
ON/OFF setting
Hold down the power button while pressing
buttons 1 and 2
The buzzer sound
Release the button 1.
The buzzer sound changes after 3 seconds.
*The power turns
operation.
Release the button 2
The buzzer
*The power turns
operation.
Release the power button.
The buzzer pips
*The power turns
operation.
Press the button 1.
The buzzer
*To stop
button.
Power button
By pressing and holding the power button
communication with the
in green, and the
While the power is on, communication is performed regardless of the state of
so you can determine whether communication is possible before oper
By pressing and holding the power button while the power is on, the power is turned off
Also, if the auto power off function continues for 10 minutes (when the
initial setting) the button 1 to 4 are not operated, the power tur
the mute setting is ON, it does not sound that the buzzer does not occur
us for changes in auto power off time.
f the state in which no button
off function
*When the mute setting is ON, the buzz
For details on changing the auto power off time, please consult
Buzzer sound
2.4W will emit a buzzer sound as an operation sound only when the buttons 1 to 4 are
communication established
receiver unit.
*When the mute setting is ON, the buzzer does no function.
Mute setting
, the buzzer sound can be muted by setting the
ON/OFF setting
Hold down the power button while pressing
buttons 1 and 2
The buzzer sound
Release the button 1.
The buzzer sound changes after 3 seconds.
*The power turns
operation.
Release the button 2
The buzzer
peeps
*The power turns
operation.
Release the power button.
The buzzer pips
*The power turns
operation.
Press the button 1.
The buzzer
peeps once
*To stop
mute setting
Power button
By pressing and holding the power button
communication with the
receiver unit
in green, and the
While the power is on, communication is performed regardless of the state of
so you can determine whether communication is possible before oper
By pressing and holding the power button while the power is on, the power is turned off
Also, if the auto power off function continues for 10 minutes (when the
initial setting) the button 1 to 4 are not operated, the power tur
the mute setting is ON, it does not sound that the buzzer does not occur
us for changes in auto power off time.
f the state in which no button
off function
*When the mute setting is ON, the buzz
For details on changing the auto power off time, please consult
Buzzer sound
2.4W will emit a buzzer sound as an operation sound only when the buttons 1 to 4 are
communication established
receiver unit.
*When the mute setting is ON, the buzzer does no function.
Mute setting
, the buzzer sound can be muted by setting the
ON/OFF setting
procedure
Hold down the power button while pressing
buttons 1 and 2
The buzzer sound
Release the button 1.
The buzzer sound changes after 3 seconds.
*The power turns
Release the button 2
peeps
*The power turns
Release the power button.
The buzzer pips
*The power turns
Press the button 1.
peeps once
mute setting
Power button
By pressing and holding the power button
receiver unit
in green, and the
While the power is on, communication is performed regardless of the state of
so you can determine whether communication is possible before oper
By pressing and holding the power button while the power is on, the power is turned off
Also, if the auto power off function continues for 10 minutes (when the
initial setting) the button 1 to 4 are not operated, the power tur
the mute setting is ON, it does not sound that the buzzer does not occur
us for changes in auto power off time.
f the state in which no button
off function
automatically turn
*When the mute setting is ON, the buzz
For details on changing the auto power off time, please consult
Buzzer sound
for buzzer operation
2.4W will emit a buzzer sound as an operation sound only when the buttons 1 to 4 are
communication established
receiver unit.
*When the mute setting is ON, the buzzer does no function.
, the buzzer sound can be muted by setting the
procedure
Procedures
Hold down the power button while pressing
buttons 1 and 2
.
The buzzer sound
s
Release the button 1.
The buzzer sound changes after 3 seconds.
*The power turns
off
Release the button 2
peeps
twice
*The power turns
off
Release the power button.
The buzzer pips
twice
*The power turns
off
Press the button 1.
peeps once
mute setting
By pressing and holding the power button
receiver unit
in green, and the
While the power is on, communication is performed regardless of the state of
so you can determine whether communication is possible before oper
By pressing and holding the power button while the power is on, the power is turned off
Also, if the auto power off function continues for 10 minutes (when the
initial setting) the button 1 to 4 are not operated, the power tur
the mute setting is ON, it does not sound that the buzzer does not occur
us for changes in auto power off time.
f the state in which no button
(1 to 4)
automatically turn
*When the mute setting is ON, the buzz
For details on changing the auto power off time, please consult
for buzzer operation
2.4W will emit a buzzer sound as an operation sound only when the buttons 1 to 4 are
communication established
receiver unit.
*When the mute setting is ON, the buzzer does no function.
, the buzzer sound can be muted by setting the
procedure
Procedures
Hold down the power button while pressing
s
after 3 seconds.
Release the button 1.
The buzzer sound changes after 3 seconds.
off
Release the button 2
.
twice
off
Release the power button.
twice
.
off
Press the button 1.
peeps once
mute setting
By pressing and holding the power button
receiver unit
in green, and the
While the power is on, communication is performed regardless of the state of
so you can determine whether communication is possible before oper
By pressing and holding the power button while the power is on, the power is turned off
Also, if the auto power off function continues for 10 minutes (when the
initial setting) the button 1 to 4 are not operated, the power tur
the mute setting is ON, it does not sound that the buzzer does not occur
us for changes in auto power off time.
(1 to 4)
automatically turn
*When the mute setting is ON, the buzz
For details on changing the auto power off time, please consult
for buzzer operation
2.4W will emit a buzzer sound as an operation sound only when the buttons 1 to 4 are
communication established
*When the mute setting is ON, the buzzer does no function.
, the buzzer sound can be muted by setting the
procedure
s
Procedures
Hold down the power button while pressing
after 3 seconds.
Release the button 1.
The buzzer sound changes after 3 seconds.
after 10 seconds elapse without
.
twice
.
after 10 seconds elapse without
Release the power button.
.
after 10 seconds elapse without
peeps once
.
mute setting
, press and hold the power
By pressing and holding the power button
receiver unit
in green, and the
L
ink LED
While the power is on, communication is performed regardless of the state of
so you can determine whether communication is possible before oper
By pressing and holding the power button while the power is on, the power is turned off
Also, if the auto power off function continues for 10 minutes (when the
initial setting) the button 1 to 4 are not operated, the power tur
the mute setting is ON, it does not sound that the buzzer does not occur
us for changes in auto power off time.
(1 to 4)
automatically turn
*When the mute setting is ON, the buzz
er does no function.
For details on changing the auto power off time, please consult
for buzzer operation
2.4W will emit a buzzer sound as an operation sound only when the buttons 1 to 4 are
communication established
*When the mute setting is ON, the buzzer does no function.
, the buzzer sound can be muted by setting the
s
are as follows:
Procedures
Hold down the power button while pressing
after 3 seconds.
The buzzer sound changes after 3 seconds.
after 10 seconds elapse without
after 10 seconds elapse without
Release the power button.
after 10 seconds elapse without
, press and hold the power
By pressing and holding the power button
receiver unit
start
ink LED
While the power is on, communication is performed regardless of the state of
so you can determine whether communication is possible before oper
By pressing and holding the power button while the power is on, the power is turned off
Also, if the auto power off function continues for 10 minutes (when the
initial setting) the button 1 to 4 are not operated, the power tur
the mute setting is ON, it does not sound that the buzzer does not occur
us for changes in auto power off time.
(1 to 4)
are operated continues for 10 minutes (initial setting),
automatically turn
er does no function.
For details on changing the auto power off time, please consult
for buzzer operation
2.4W will emit a buzzer sound as an operation sound only when the buttons 1 to 4 are
communication established
,
you can check whether the operation was reliably
*When the mute setting is ON, the buzzer does no function.
, the buzzer sound can be muted by setting the
are as follows:
Hold down the power button while pressing
after 3 seconds.
The buzzer sound changes after 3 seconds.
after 10 seconds elapse without
after 10 seconds elapse without
after 10 seconds elapse without
, press and hold the power
By pressing and holding the power button
,
start
s
ink LED
While the power is on, communication is performed regardless of the state of
so you can determine whether communication is possible before oper
By pressing and holding the power button while the power is on, the power is turned off
Also, if the auto power off function continues for 10 minutes (when the
initial setting) the button 1 to 4 are not operated, the power tur
the mute setting is ON, it does not sound that the buzzer does not occur
are operated continues for 10 minutes (initial setting),
automatically turn
er does no function.
For details on changing the auto power off time, please consult
for buzzer operation
2.4W will emit a buzzer sound as an operation sound only when the buttons 1 to 4 are
you can check whether the operation was reliably
*When the mute setting is ON, the buzzer does no function.
, the buzzer sound can be muted by setting the
are as follows:
Hold down the power button while pressing
after 3 seconds.
The buzzer sound changes after 3 seconds.
after 10 seconds elapse without
after 10 seconds elapse without
after 10 seconds elapse without
, press and hold the power
,
the power is turned on
s
. When communication is not estab
ink LED
lights
While the power is on, communication is performed regardless of the state of
so you can determine whether communication is possible before oper
By pressing and holding the power button while the power is on, the power is turned off
Also, if the auto power off function continues for 10 minutes (when the
initial setting) the button 1 to 4 are not operated, the power tur
the mute setting is ON, it does not sound that the buzzer does not occur
are operated continues for 10 minutes (initial setting),
automatically turn
er does no function.
For details on changing the auto power off time, please consult
for buzzer operation
2.4W will emit a buzzer sound as an operation sound only when the buttons 1 to 4 are
you can check whether the operation was reliably
*When the mute setting is ON, the buzzer does no function.
, the buzzer sound can be muted by setting the
are as follows:
Hold down the power button while pressing
after 3 seconds.
The buzzer sound changes after 3 seconds.
after 10 seconds elapse without
after 10 seconds elapse without
after 10 seconds elapse without
, press and hold the power
8
the power is turned on
. When communication is not estab
lights
While the power is on, communication is performed regardless of the state of
so you can determine whether communication is possible before oper
By pressing and holding the power button while the power is on, the power is turned off
Also, if the auto power off function continues for 10 minutes (when the
initial setting) the button 1 to 4 are not operated, the power tur
the mute setting is ON, it does not sound that the buzzer does not occur
are operated continues for 10 minutes (initial setting),
automatically turn
s
off
er does no function.
For details on changing the auto power off time, please consult
for buzzer operation
2.4W will emit a buzzer sound as an operation sound only when the buttons 1 to 4 are
you can check whether the operation was reliably
*When the mute setting is ON, the buzzer does no function.
, the buzzer sound can be muted by setting the
are as follows:
Hold down the power button while pressing
The buzzer sound changes after 3 seconds.
after 10 seconds elapse without
after 10 seconds elapse without
after 10 seconds elapse without
, press and hold the power
the power is turned on
. When communication is not estab
lights
when communication is established
While the power is on, communication is performed regardless of the state of
so you can determine whether communication is possible before oper
By pressing and holding the power button while the power is on, the power is turned off
Also, if the auto power off function continues for 10 minutes (when the
initial setting) the button 1 to 4 are not operated, the power tur
the mute setting is ON, it does not sound that the buzzer does not occur
are operated continues for 10 minutes (initial setting),
off
the
er does no function.
For details on changing the auto power off time, please consult
for buzzer operation
2.4W will emit a buzzer sound as an operation sound only when the buttons 1 to 4 are
you can check whether the operation was reliably
*When the mute setting is ON, the buzzer does no function.
, the buzzer sound can be muted by setting the
are as follows:
Hold down the power button while pressing
The buzzer sound changes after 3 seconds.
after 10 seconds elapse without
after 10 seconds elapse without
after 10 seconds elapse without
, press and hold the power
the power is turned on
. When communication is not estab
when communication is established
While the power is on, communication is performed regardless of the state of
so you can determine whether communication is possible before oper
By pressing and holding the power button while the power is on, the power is turned off
Also, if the auto power off function continues for 10 minutes (when the
initial setting) the button 1 to 4 are not operated, the power tur
the mute setting is ON, it does not sound that the buzzer does not occur
are operated continues for 10 minutes (initial setting),
the
er does no function.
For details on changing the auto power off time, please consult
for buzzer operation
2.4W will emit a buzzer sound as an operation sound only when the buttons 1 to 4 are
you can check whether the operation was reliably
*When the mute setting is ON, the buzzer does no function.
, the buzzer sound can be muted by setting the
Hold down the power button while pressing
after 10 seconds elapse without
after 10 seconds elapse without
after 10 seconds elapse without
, press and hold the power
the power is turned on
. When communication is not estab
when communication is established
While the power is on, communication is performed regardless of the state of
so you can determine whether communication is possible before oper
By pressing and holding the power button while the power is on, the power is turned off
Also, if the auto power off function continues for 10 minutes (when the
initial setting) the button 1 to 4 are not operated, the power tur
the mute setting is ON, it does not sound that the buzzer does not occur
are operated continues for 10 minutes (initial setting),
the
power
er does no function.
For details on changing the auto power off time, please consult
for buzzer operation
2.4W will emit a buzzer sound as an operation sound only when the buttons 1 to 4 are
you can check whether the operation was reliably
*When the mute setting is ON, the buzzer does no function.
, the buzzer sound can be muted by setting the
Hold down the power button while pressing
the
after 10 seconds elapse without
after 10 seconds elapse without
after 10 seconds elapse without
, press and hold the power
the power is turned on
. When communication is not estab
when communication is established
While the power is on, communication is performed regardless of the state of
so you can determine whether communication is possible before oper
By pressing and holding the power button while the power is on, the power is turned off
Also, if the auto power off function continues for 10 minutes (when the
initial setting) the button 1 to 4 are not operated, the power tur
the mute setting is ON, it does not sound that the buzzer does not occur
are operated continues for 10 minutes (initial setting),
power
For details on changing the auto power off time, please consult
for buzzer operation
2.4W will emit a buzzer sound as an operation sound only when the buttons 1 to 4 are
you can check whether the operation was reliably
, the buzzer sound can be muted by setting the
the
after 10 seconds elapse without
after 10 seconds elapse without
after 10 seconds elapse without
, press and hold the power
the power is turned on
. When communication is not estab
when communication is established
While the power is on, communication is performed regardless of the state of
so you can determine whether communication is possible before oper
By pressing and holding the power button while the power is on, the power is turned off
Also, if the auto power off function continues for 10 minutes (when the
initial setting) the button 1 to 4 are not operated, the power tur
the mute setting is ON, it does not sound that the buzzer does not occur
are operated continues for 10 minutes (initial setting),
power
.
For details on changing the auto power off time, please consult
Circuit Design, Inc.
2.4W will emit a buzzer sound as an operation sound only when the buttons 1 to 4 are
you can check whether the operation was reliably
, the buzzer sound can be muted by setting the
mute function ON.
Buzzer:
Link
Buzzer:
Link
Buzzer: Peep
Link
Buzzer:
Battery LED: On
Link
Buzzer:
Battery LED: Off
Link
the power is turned on
. When communication is not estab
when communication is established
While the power is on, communication is performed regardless of the state of
so you can determine whether communication is possible before oper
By pressing and holding the power button while the power is on, the power is turned off
Also, if the auto power off function continues for 10 minutes (when the
initial setting) the button 1 to 4 are not operated, the power tur
ns off automatically. * When
the mute setting is ON, it does not sound that the buzzer does not occur
are operated continues for 10 minutes (initial setting),
Circuit Design, Inc.
2.4W will emit a buzzer sound as an operation sound only when the buttons 1 to 4 are
you can check whether the operation was reliably
mute function ON.
Buzzer:
Link
LED
Buzzer:
Link
LED
Buzzer: Peep
Link
LED
Buzzer:
Battery LED: On
Link
LE
Buzzer:
Battery LED: Off
Link
LE
OPERATION GUIDE
the power is turned on
with a buzzer sound
. When communication is not estab
when communication is established
While the power is on, communication is performed regardless of the state of
so you can determine whether communication is possible before oper
By pressing and holding the power button while the power is on, the power is turned off
Also, if the auto power off function continues for 10 minutes (when the
ns off automatically. * When
the mute setting is ON, it does not sound that the buzzer does not occur
are operated continues for 10 minutes (initial setting),
Circuit Design, Inc.
2.4W will emit a buzzer sound as an operation sound only when the buttons 1 to 4 are
you can check whether the operation was reliably
mute function ON.
Buzzer
Buzzer:
Long peep
LED
Buzzer:
Short peep
LED
Buzzer: Peep
LED
Buzzer:
Pip
Battery LED: On
LE
: Off
Buzzer:
Short peep (once)
Battery LED: Off
LE
D
OPERATION GUIDE
with a buzzer sound
. When communication is not estab
when communication is established
While the power is on, communication is performed regardless of the state of
so you can determine whether communication is possible before oper
ation.
By pressing and holding the power button while the power is on, the power is turned off
Also, if the auto power off function continues for 10 minutes (when the
ns off automatically. * When
the mute setting is ON, it does not sound that the buzzer does not occur
are operated continues for 10 minutes (initial setting),
Circuit Design, Inc.
2.4W will emit a buzzer sound as an operation sound only when the buttons 1 to 4 are
you can check whether the operation was reliably
mute function ON.
Buzzer
Long peep
LED
: Blink
Short peep
LED
: Blink
Buzzer: Peep
LED
: Blink
Pip
-
pip (twice)
Battery LED: On
: Off
Short peep (once)
Battery LED: Off
D
: On
OPERATION GUIDE
with a buzzer sound
. When communication is not estab
when communication is established
While the power is on, communication is performed regardless of the state of
ation.
By pressing and holding the power button while the power is on, the power is turned off
Also, if the auto power off function continues for 10 minutes (when the
ns off automatically. * When
the mute setting is ON, it does not sound that the buzzer does not occur
are operated continues for 10 minutes (initial setting),
Circuit Design, Inc.
2.4W will emit a buzzer sound as an operation sound only when the buttons 1 to 4 are
you can check whether the operation was reliably
mute function ON.
Buzzer
Long peep
: Blink
Short peep
: Blink
Buzzer: Peep
-
peep (twice)
: Blink
pip (twice)
Battery LED: On
Short peep (once)
Battery LED: Off
: On
OPERATION GUIDE
Circuit Design, Inc.
with a buzzer sound
. When communication is not estab
when communication is established
While the power is on, communication is performed regardless of the state of
ation.
By pressing and holding the power button while the power is on, the power is turned off
Also, if the auto power off function continues for 10 minutes (when the
ns off automatically. * When
the mute setting is ON, it does not sound that the buzzer does not occur
※
are operated continues for 10 minutes (initial setting),
Circuit Design, Inc.
2.4W will emit a buzzer sound as an operation sound only when the buttons 1 to 4 are
you can check whether the operation was reliably
mute function ON.
sound
Long peep
Short peep
peep (twice)
pip (twice)
Battery LED: On
Short peep (once)
Battery LED: Off
OPERATION GUIDE
Circuit Design, Inc.
with a buzzer sound
. When communication is not estab
when communication is established
While the power is on, communication is performed regardless of the state of
1 to 4
ation.
By pressing and holding the power button while the power is on, the power is turned off
Also, if the auto power off function continues for 10 minutes (when the
ns off automatically. * When
Please contact
are operated continues for 10 minutes (initial setting),
Circuit Design, Inc.
.
2.4W will emit a buzzer sound as an operation sound only when the buttons 1 to 4 are
you can check whether the operation was reliably
mute function ON.
sound
Long peep
(repeated)
Short peep
.(repeated).
peep (twice)
pip (twice)
Short peep (once)
OPERATION GUIDE
Circuit Design, Inc.
with a buzzer sound
. When communication is not estab
lished, the
when communication is established
1 to 4
By pressing and holding the power button while the power is on, the power is turned off
Also, if the auto power off function continues for 10 minutes (when the
ns off automatically. * When
Please contact
are operated continues for 10 minutes (initial setting),
2.4W will emit a buzzer sound as an operation sound only when the buttons 1 to 4 are
you can check whether the operation was reliably
sound
/
LED
(repeated)
.(repeated).
peep (twice)
Short peep (once)
OPERATION GUIDE
Circuit Design, Inc.
with a buzzer sound
lished, the
when communication is established
1 to 4
By pressing and holding the power button while the power is on, the power is turned off
Also, if the auto power off function continues for 10 minutes (when the
ns off automatically. * When
Please contact
are operated continues for 10 minutes (initial setting),
2.4W will emit a buzzer sound as an operation sound only when the buttons 1 to 4 are
you can check whether the operation was reliably
LED
(repeated)
.(repeated).
peep (twice)
Short peep (once)
OPERATION GUIDE
Circuit Design, Inc.
with a buzzer sound
lished, the
when communication is established
.
1 to 4
buttons,
By pressing and holding the power button while the power is on, the power is turned off
Also, if the auto power off function continues for 10 minutes (when the
ns off automatically. * When
Please contact
are operated continues for 10 minutes (initial setting),
2.4W will emit a buzzer sound as an operation sound only when the buttons 1 to 4 are
you can check whether the operation was reliably
LED
(repeated)
.(repeated).
OPERATION GUIDE
Circuit Design, Inc.
and
lished, the
buttons,
By pressing and holding the power button while the power is on, the power is turned off
with
Also, if the auto power off function continues for 10 minutes (when the
ns off automatically. * When
Please contact
are operated continues for 10 minutes (initial setting),
2.4W will emit a buzzer sound as an operation sound only when the buttons 1 to 4 are
OPERATION GUIDE
Circuit Design, Inc.
and
buttons,
with
ns off automatically. * When
Please contact
are operated continues for 10 minutes (initial setting),
2.4W will emit a buzzer sound as an operation sound only when the buttons 1 to 4 are
OPERATION GUIDE
Circuit Design, Inc.
buttons,
with
are operated continues for 10 minutes (initial setting),
2.4W will emit a buzzer sound as an operation sound only when the buttons 1 to 4 are