User guide

Circle Communication Products, Inc
2.4G Cordless Telephone System - Handheld Extension (WHE ER) user guide
Page 26
Result: The LCD show the record acknowledgement
Redial
Description:
Every telephone in the system automatically saves the last
telephone number dialed to a line and allows the extension
user to dial the same number again.
Activation: Press redial and the telephone dials the last number once
time.
Result: The LCD show the last number
Ring Tone and Volume – Line / Intercom
Description:
Allows the telephone user to turn up or down the following
volume as desired:
Handset receiver volume
Ringer volume
Speaker volume
Setup:
Press MENU, use  Up and 
Down Scroll key to select
Phone Setting  Ringer
1. Line Ring VOL : press  Up or 
Down Scroll key to
select the volume level from 0 to 31
2. Line Ring Tone : press  Up or  Down Scroll
key to
select the pattern from 0 to 8
3. Intercom Ring VOL : press  Up or 
Down Scroll key
to select the volume level from 0 to 31
4. Intercom Ringer Tone : press  Up or 
Down Scroll
key to select the pattern from 0 to 8
Result: The LCD displays indicate the level.
Speaker
Description: Allows the extension user to use hands free in a conversation
Activation:
Press SPEAKER key to turn on the speaker
Result:
The SPEAKER key
LED lights on when press and turns off
after a while.
Deactivation:
Press SPEAKER key
again to turn off speaker mode It is
toggle switch on and off.
Note
Press the END
key to end the call in either hands free mode
or handset mode.
User Name
Description:
The user name display is programmable. The user name will
be collected auto
matically when the phone is plugged in. The
user name will display on the LCD and use to alert the other
extension in calling information display